yer right...hrmm... -Charles --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of MadNet Sent: Wednesday, November 12, 2003 2:19 AM To: Karlnet
yes Will the Karlnet AP+ software see one of those 802.11b clients/bridges like the Linksys WET11 or the engenius CB3+ ?? _______________________________________________ Karlnet mailing list Karlnet@
kn-50 is rated for outdoor use kn-50 also works w/ higher powered network cards stay tuuned...early next week, we will be unveiling our own brand of integrated products for KarlNet that should knock
to my knowledge, there is ONLY an NDIS driver for the Orinoco cards Hello ALL, I just test The SMC 200mW, With my Base Station/Satellite and works Great. Wonder if anyone Test it with NDIS Client, or
exactly... --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Bob Hrbek Sent: Monday, November 17, 2003 11:24 AM To: Karlnet Mailing List Subj
nope...the Flashrom is a build-your-own PC type of setup -Charles --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Jayson Baker Sent: Monday
the KN-200 is MUCH better than the AP-1000, you'll see a noticed improvement -Charles --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Jayso
flashrom is an IDE flash flash slots are for compact flash... -Charles --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Jayson Baker Sent: M
does the routerboard 230 have an IDE slot (for an IDE Flashrom)? if so...that answers your question.. -Charles I need a flashrom setup to handle a growing cell site. I have about 50 clients on a KN-2
well...you have the KN-100 http://www.cwlab.com/Products/KarlNet/KN-100.htm also...we have it in an attractive looking 19 dBi enclosed antenna, w/ a good PoE solution that works the same whether it's
a $250 CPE w/ everything included... integrated 19 dBi antenna offlist for more info -Charles -- Original Message -- From: "Charles Chia Sheng Wu" <cwu@cwlab.net> To: "Karlnet Mailing List" <karlnet
use the KN-100 boards? usually, it's a sign of not enough power at the RG (since the power draw of the prism cards is higher) - how are you powering the RG? Poe? or the wall wart -Charles I'm current
cool well..v4.02 & 4.43 can be upgraded to the latest...v 3.x, you'll probably want to purchase upgrade keys it didn't work right kind of ok you're setup is perfect for the KN-50 (especially our $25
you need to use the latest configurator - download it from KarlNet http://www.karlnet.com/Support/SupportDownloads.htm -Charles I am trying to upgrade a rg1100 with a knscotcn-v4[1].43k.bin to knscot
where is the error coming from? does it come while you load your key? or does it come while you're trying to upload software? 2 different problems, 2 different remedies the first problem requires one
no problem ok it is where you generate your keys - offlist for the manuual replaced? it depends ENTIRELY on your KarlNet reseller It's usually recommended that you go w/ KarlNet's preferred channel
actually, there ARE vendors that are open, 24/7 btw Kevin, thanks for dinner...for some odd reason, everyone in the office has started wearing their KarlNet hats...<wink> -Charles -- KarlNet Preferr
for fail-over, you don't have a default route... -Charles Well my problem is this If you put a default router IP on the karlnet unit, how does a RIP update replace that? for example, my default route
what do you mean? multi-homed denotes multiple upstreams? and KarlNet doesn't do BGP -Charles anybody using karlnet in a network that is multihomed? _______________________________________________ Ka
you need the locator - check email offlist -Charles Hello List. Well, I've tried now for about 30 minutes to figure out how to connect to the Ubicom I purchased recently, but am thus far unsuccessful