How long before we see support for the intersil radio's? Dan Metcalf Wireless Broadband Systems http://www.wbsysnet.com/ 877-685-0578 dan.metcalf@wbsysnet.com On Other [mailto:karlnet-admin@WISPNotes
I have seen a noticeable performance issue when switching ap over to isp base instead of normal polling -- [This E-mail scanned for viruses by Declude Virus]
Roger, Yes we see a performance issue when we switched the AP configuration from Normal polling to ISP Base w/ protocol filtering. Basically the throughput of the radio dropped by over 20% from aroun
Only thing I changed was from normal polling to isp base station w/ protocol filters Not using WEP at all Dan Metcalf Wireless Broadband Systems http://www.wbsysnet.com/ 877-685-0578 dan.metcalf@wbsy
Ok, I turned off the Firewall Feature and performance seem to improve a little bit Dan Metcalf Wireless Broadband Systems http://www.wbsysnet.com/ 877-685-0578 dan.metcalf@wbsysnet.com On base [mailt
I find that cell sites have very dirty power, always use a UPS/line filter Dan Metcalf Wireless Broadband Systems http://www.wbsysnet.com/ 877-685-0578 dan.metcalf@wbsysnet.com On standard industrial
Will these cards work in the ap1000 or the rg1000 running this *new* version of karlnet? If so this is great news. I've been looking at a 5.8 migration :-) Also if this chipset supports 5.8 and 2.4 i
This option is under outgoing nat setup, we are having a problem with v4.02 and NAT leaking through. I'm wondering if this setting has anything to do with it? Does anybody know what this setting does
NO I don't have bridging selected! Dan Metcalf Wireless Broadband Systems http://www.wbsysnet.com/ 877-685-0578 dan.metcalf@wbsysnet.com On NAT??? a [mailto:karlnet-admin@WISPNotes.com]On [mailto:kar
And its only leaking the Ethernet IP/MAC of the rg1000, not any clients on the Ethernet side. But technically I should NOT see that IP/MAC combo on the AP. Dan Metcalf Wireless Broadband Systems http
Currently its NOT selected, but what does that do when you inhibit nat on the 802.11b interface? Dan Metcalf Wireless Broadband Systems http://www.wbsysnet.com/ 877-685-0578 dan.metcalf@wbsysnet.com
Ok, I set to inhibit on 802.11b side and so far looks good Geez, were's the doc's for this feature? Dan Metcalf Wireless Broadband Systems http://www.wbsysnet.com/ 877-685-0578 dan.metcalf@wbsysnet.c
I setup a customer w/ the NDIS client and they show up on the AP as a compatible? What does that mean -- [This E-mail scanned for viruses by Declude Virus]
Thanks - honestly it could mean a bunch of different things. It could mean that the interface is excluded from the NAT process, it could be mean that it "blocks" all NAT traffic etc etc On desire) [m
Use the Motorola system its outdoor mountable, charles can get htem Dan Metcalf Wireless Broadband Systems http://www.wbsysnet.com/ 877-685-0578 dan.metcalf@wbsysnet.com On [mailto:karlnet-admin@WISP
I'm running a karlnet AP in 802.11b mode, how can I bring up a list of linked clients? Dan Metcalf Wireless Broadband Systems http://www.wbsysnet.com/ 877-685-0578 dan.metcalf@wbsysnet.com On [mailto
Yes it shows up under wireless link test, but I was wondering if its possible to see them like you do under turbocell stations Dan Metcalf Wireless Broadband Systems http://www.wbsysnet.com/ 877-685-
I was wondering if anybody had a karlnet bin later than v4.02, I don't mind if its beta as I know release 4.17 fixed some of the FW code, but I lost the copy I had... Thanks Dan -- [This E-mail scann
Interesting. What is the performance impact of using 64bit wep on the ap1000 and the rg1000?<o:p></o:p> <o:p> </o:p> Dan Metcalf<o:p></o:p> Wireless Broadband Systems<o:p></o:p> http://www.wbsysnet.c