"The Karlnet Case"? Regards, Jayson A. Baker Peak Internet Solutions --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Justin W. Pauler Sent
Hi, We have three KN-100 boards purchased from two different distributors over the past two weeks. Neither of which initialize the cards in the slot (tried Lucent Silver, Orinoco Silver, YDI Sapphire
None of the three function. Does not initialize the PCMCIA cards at all. Loading the SG-4000 license. When opened in the Configurator, doesn't even show PCMCIA at all - just eth. Nor does it show "Em
Done that. Multiple times w/ multiple boards. Regards, Jayson A. Baker Peak Internet Solutions I have seen this in the past, I just needed to reload the s/w on the board [mailto:karlnet-bounces@WISPN
It isn't a key issue... Licensed more than one board. Regards, Jayson A. Baker Peak Internet Solutions Did you rekey the license???? [mailto:karlnet-bounces@WISPNotes.com] [mailto:karlnet-bounces@WIS
A plastic case. Regards, Jayson A. Baker Peak Internet Solutions --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Dan Metcalf Sent: Sunday,
That seems to have worked. Interesting... we usually just upload it, then it figures it out. Oh well! It works. Thanks. Regards, Jayson A. Baker Peak Internet Solutions Jay, Forgive me if this seems
We're in the process of implementing Motorola Canopy throughout our entire coverage area because they listen to our requests and make software that fits our needs (i.e. all CPE's just got the feature
As do we. We just implemented NAT/DHCP on everything across the board. Regards, Jayson A. Baker Peak Internet Solutions We almost exclusively use Karlnet SEC with NAT AND DHCP. I'd say about 5 out of
Yup. But they brought them back until end of November so you can "stock up" Regards, Jayson A. Baker Peak Internet Solutions --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-b
Especially when Motorola just released a 2.4GHz product - by far, will blow anything 802.11 away, especially the high prices of Karlnet. Regards, Jayson A. Baker Peak Internet Solutions Exactly, Karl
Not seen this integrated unit... specs on it? Must also add software license? Power supply? What about us who shoot 20+ miles and need 24dBi dishes? Regards, Jayson A. Baker Peak Internet Solutions t
I don't know. Ask Motorola. I only heard it was released. Regards, Jayson A. Baker Peak Internet Solutions Jayson, What are the specs on the 2.4ghz stuff? Thanks, Dan [mailto:karlnet-bounces@WISPNote
YDI does, they call it "YDI-Fi" (Karlnet) Regards, Jayson A. Baker Peak Internet Solutions We have been using the Etherant for the last 2 years. I wanted something better with throttling. I live in M
Routing is routing is routing. Whether you're using private IP's and routing public over it, or just routing public - you're still routing. If you're only doing a point-to-point-to-point link I'd rec
So the one in the middle, the KN-200, is in routing mode, with no IP's? Go to either RG on either end, set them to bridging mode - plug in your laptop to the Ethernet port and hit scan, you'll see th
Your descriptions are very difficult to follow. I think I understand it as your KN-200 doesn't have any IP's assigned to the wireless interfaces... this doesn't matter. Connect to it on either wirele
No, you won't be able to get to it through the AP-1000 unless it, and the adjacent RG, are both in bridging mode. How can you get to it via routed if there's nothing routed? Regards, Jayson A. Baker
Is the IP on your computer in the same subnet as that of the KN-200? Regards, Jayson A. Baker Peak Internet Solutions No this did not work. I plugged right into the RG's Ethernet port via a crossover