FYI everyone: The new KN-100 & 200 boards now have temperature control. The fan starts operating at 45deg C. When/if the board reaches 30deg C, the fan will turn its self off. The fan comes on for a
Kevin, What exactly is the "heat issue" and "corruption issue"? Is this a PoE issue only? voltage related issue only? Please, explain this fully. Also, is there any way to identify the small "percent
I've got the same problem, I have a number of Base Stations at capacity and people pleading to get internet service. I can't wait any longer for the 128 satellite version (if it is ever released). **
Have you looked at the amount of spectrum 802.11a would use? There are alot of 5.8GHz solutions that use significantly less bandwidth (6 to 20MHz) typically plus you get the advantage of a real TDMA
AP-1000's & RG-1100's are very tempermental. We've had about 22 out of 400 RG-1100 failures or 18% failure rate. Also, 4 AP-1000's out of 18 or 22% failure rate. I've been keeping track of serial num
Hector, I don't think your question is appropriate for this mailing list but to answer your question (assuming you're doing this with Configurator) For this example, I need to assume 192.168.101/24 i
Hi Kevin, Can you give us a technical overview of how the Beta bin that you mention handles more connections? I have 3 sites that are now completely full with 2 more close to full so I am very intere
I've never seen any Karlnet firmware release that permits SNMP read access to use the Wireless Link Test function of Configurator. ** REPLY SEPARATOR **
Can someone ask around Karlnet to see if a firmware update is feasable? It would be nice to allow the SNMP read password access the Link Test function for exactly the purpose Wes suggested. We also u
I don't think it's really that big of an issue. If a customer has the worm, why not call them and let them know? If you can't get ahold of them, shut them down until they can fix the problem. ** REPL
I have been hearing alot of chatter about fluctuating ping times and would appreciate hearing from Karlnet on this subject. My personal feeling about this subject is that because of the way that radi
I'm looking into having 1000 of these made at an injection moulding facility. I have 2 questions for everyone on this list: - Anyone already getting an outdoor enclosure with N-Type and RJ45 weatherp
This morning I upgraded my Base Stations to ver. 4.43k. So far, I've had to disable SNMP trapping on 3 more of my Base Stations because they are flooding the SNMP trap logger with Link Up, Link Down