Bob, Not sure about your hardware question, but I am curious which software version you are running? Kevin ** Kevin R. Knuth Business Development Manager North America 260-424-9690 Regional Office 61
The KN-100 has the same form factor as the KN-50. We do offer support for some of of the soekris boards as well. Both of those options, while not low cost, support all of our software options. Kevin
Actually, the tertiary firmware does not really upload the software to the card, it just overrides it. If any of you remember re-flashing radio cards, it was a pain in the rear! Kevin ** Kevin R. Knu
I think you will find that 4.44 may help you out. There are always exceptions, but the KN-200 should be able to handle 50 subscribers. Kevin ** Kevin R. Knuth Business Development Manager North Ameri
I believe we only support the 4501. Kevin ** Kevin R. Knuth Business Development Manager North America 260-424-9690 Regional Office 614-822-5275 Corporate Office kknuth@karlnet.com www.karlnet.com **
Wireless Authentication and Registration Protocol Basically, unless you have authorized someone to use your network, we re-direct them to a site of your choice (preferably so they can buy time). Unli
It is in 4.44 ** Kevin R. Knuth Business Development Manager North America 260-424-9690 Regional Office 614-822-5275 Corporate Office kknuth@karlnet.com www.karlnet.com ** --Original Message-- From:
OOOOPS! Seems that there is a problem with the RADIOLAN driver. Give me a day to get you an answer on which ones we support and when we will add support back in! Kevin ** Kevin R. Knuth Business Deve
If you get 4.44 configurator, be sure to check out the help file (by pressing F1). Our tech writer has spent a lot of time on that and it is much improved! Kevin ** Kevin R. Knuth Business Developmen
All, Here is what you have to do! You need configurator 4.44. AND- you need to regenerate your key with WARP activated (there is no charge for this if you have version 4.xx) Then it will not be graye
Peter, Support for Prism cards in AP mode is SCHEDULED for version 4.45. This could be delayed though, since we do not have much demand for Prism in 802.11 mode, only in TurboCell. This allows higher
All, Since there has been much discussion on the lists I did some checking with the engineers. Bottom line: it is VERY doubtful that we can add SNMP support to the KN-50. There is simply not enough r
NOT a stupid question! Yes the board is our design. The problem is in the UBICOM chip! Although single chip solutions are a blessing in that they reduce costs, they aslo are limited in how much memor
Yes I do! I will forward this to engineering RIGHT AWAY! Kevin ** Kevin R. Knuth Business Development Manager North America 260-424-9690 Regional Office 614-822-5275 Corporate Office kknuth@karlnet.c
If you are referring to the issue of the problems I have see posted about the DELL and OEM cards, I have engineering working on it. Kevin ** Kevin R. Knuth Business Development Manager North America
Okay, I am going to pass this along. I know that the engineers are looking at the DELL/OEM issue. Not sure I have heard much about the lock up or reboot thing. Kevin ** Kevin R. Knuth Business Develo
Yeah, I am not sure why that is on our website. They really should have waited. Anyway- Monday the bin files will be there! Kevin ** Kevin R. Knuth Business Development Manager North America 260-424-
They are there! ** Kevin R. Knuth Business Development Manager North America 260-424-9690 Regional Office 614-822-5275 Corporate Office kknuth@karlnet.com www.karlnet.com ** Is 4.44 still going to be
Scott I have version 4.43k in my home setup. Radius accounting is NOT grayed out. What version are you running? Kevin ** Kevin R. Knuth Business Development Manager North America 260-424-9690 Regiona
Any version 4.xx key will work with version 4.44. There is no upgrade fee. Kevin ** Kevin R. Knuth Business Development Manager North America 260-424-9690 Regional Office 614-822-5275 Corporate Offic