I did have one lemon that I sent back that had like 25% packet loss...FYI. through. complete as _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists
Anyone got a good supplier for integrated KN-50/19dB Karlnet CPEs? What about KN-50 radios in a separate waterproof, external antenna flavor? Experiences? Good on RMAs? Thanks, Norm _________________
Hi Brad, My understanding is that the Ubicom based radios don't have this problem, and are 100mW. The KN-50s did have this problem, but has now been addressed by Karlnet. (I have several new KN-50 ca
This is what I've heard: This issue has been addressed and we are NOW SHIPPING KN-50 with the following Product ID's: 1) KIT-0009 KN-50 with TurboCell Ethernet Bridge Software for Hermes II 2) KIT-00
Fresh from the field (yesterday afternoon) with the new firmware load. (v1.10-00-101315, Hermes II, KN-50s) The situation is a customer with not great S/N ratio...right around 14dB on CH1, about 5dB
Dan, they might. After talking to MapleNet support (Randy), I'm wondering if I got two duds (unlikely) or that I'm doing something wrong. (I've been setting these things up for many moons now, howeve
In the last week or so, I've been getting complaints from customers who say that they have problems accessing the Internet via their web browsers, ie; page not found on a sporadic basis. On investiga
No, the customers routers WAN's are set to a static IP, and the LAN side information that acts as the DHCP server has the DNS server information set on it manually. Customers are bridged to the APs v
What is the PoE maximum voltage that the KN205 accepts? 24vdc (hope, hope)? Norm _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/
I think it's in beta testing now. (Or so I've heard.) Norm _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/karln
We have no problem with these units. They (with a few exceptions in the past) have worked quite well for us. As for them being reset. ???? Never have seen that one. (yet?) Norm Did you actually get o
I've seen 2Mbps through a KN50/Ubicom CPE. I generally like them, with the exception of I'd like to see them NAT. Since we're talking throughput, I'd like to run this scenario by everyone. I have an
Dan, I'm bridging, so there's no routing overhead. What's your SNR on the link? I'm guessing that I need to replace this link with one made up of Trango (or possibly KN) 5.8GHz radios. Norm _________
Anyone have any ideas on what the ideal operating temperature on the bench should be? I've got a KN-205 w/two 200mW cards slotted in an enclosure with no fan, and it seems to want to run about 116 de
I'm burning in a KN-205 for use as a repeater, and I was under the impression that J3, the fan header was going to be under some kind of thermal control, as opposed to the KN-200. It looks like it is
I recently tested a PtP shot we have using KN, and ping fill reported an average thoughput of 3.88Mbps. Testing it using a the bandwidth tester provided with the Mikrotik router on one end shows that
Why don't you try the BWR-1000's from MapleNet? They work very well, have a external N-male connector, and are based on the KN-50 (which so far I'm pretty happy with). Norm __________________________
I'd really like to see NAT/DHCP on the KN-50. We've been insisting on customer's purchase of a router and that we manage it. However, it's a slow slide into the hell of managing the customer's intern
Amen brother(s). Same problem noted here. It really limits where I can use the KN-50 CPEs. Norm _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists
I've also seen this problem quite often, reboot on access of webpage from wireless side. Norm _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.w