<grin> I run into those every once and awhile, and I have a hard time not laughing also. They really want you to take them seriously. :) Norm in Company
I'm going to replace the second channel doing backhaul of an AP-1000 at our main WIPOP using the base station software with a dedicated backhaul radio. I'd like this system to support several radios
I'm using TC 4.31 and PRISM 2.5 radios. The radios have never given proper signal strength readings. However I got the impression that if one upgraded the firmware on the PRISM 2.5 radios, this probl
Interesting. Not sure if I believe the readings. The signal values reported by the PRISM 2.5 radio in the AP are quite aways out from that reported at the client. (Client SNR=11, AP=25, Client Signal
Any chance we can get this device with a 12" N/f bulkhead pigtail so it can go in a NEMA box? And what about integrating it in a 19dB panel that can also house the radio? There was some talk about th
So, as it stands, it's a 5vdc supply, and the cable run on it that we can expect should be on the order of 25' or so, like the WET11. I've been able to extend that by using a 9vdc supply for the WET1
While I don't want to support aimless bitching, I do think that a certain level of criticism for Karlnet is both warranted, and constructive, in that it gives them feedback on their products and busi
I've never been able to get that to work. In practice, what I've seen is that in setting the speed on the two interfaces for say, an asymmetrical connection like 256/128kbps, results in both interfac
Is this new board have two radio slots on it as well as two Ethernet? I'm looking at replacing using the second radio slot in our existing AP-1000 currently used as a backhaul with a dedicated device
Thanks Nate. I was pretty sure I'd have to get the base station license to get both radios active, so this is a pleasant surprise. What's the pricing on the WPBASE+? Norm well. just 2
I would like to know the same about the KN-200. Do the boards that are shipping now have temperature control on the fan header? It seems that fans are required, PoE or no. I remember trying both ways
StarOS has good support for this device now http://www.netgate.com/5354AriesMP.html on the new PC Engines WRAP board (multiple Ethernet, multiple mini PCI) http://www.station-server.com/prices.php .
And I would add to the excellent points Brad made by saying that I want to play with this relatively new frequency on the backhaul as I think about how to get better BW into the PtMP loop. Whatever I