Im interested in why some of the WISP's out there, using karlnet, are running bridgeing mode. We only use it when we assign public ip's. Regards, Martin Madsen PH:(818) 380-8170 FX: (818) 380-8175 I
We do not use karlnet AP's for any routing. On the bigger community networks we route using Cisco 2610 (they are so cheap now) the reason not to use karlnet for routing is that im not sure how much p
Which is base one and 2? does the sat AP-1000 have 2 incomming links?? Please be more specific. Martin Madsen _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.co
also which mode are you using for the sat links? Martin Madsen _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/k
Hi Jayson, I suggest you change your setup so u have 2 cards in the bases, use 1 interface on each to link back to a central base (The 4400 has the ability to act as a satellite on either interface).
Well Jayson, All I can say is that if you dont appriciate the help you get then i have nothing for you. All the CRAP I was giving you was years of experience in running a successful WISP using Karlne
Jayson, See the pic and tell me if im getting it right now. Only thing I can think of is that TC will link but not pass data if the community strings (system access) are not matching. The current bui
Can you do a linktest from base2 to sat and is it passing frames? Martin _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/
Send me a copy of the conf. file from the bases and the sat. Ill take a look at it. Martin _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wisp
I was not aware of the Orinoco AP-500 was the same hardware as the RG-1000, but if they are you could buy 2x SR-4000 from winncom or any of the karlnet distributors. This will allow you to pass 1 MAC
Im not aware of any freewares, but licenses from karlnet ranges from around $40 for a SR-4000 to $199 for the SA-4200. If you want to create a wireless link less than 12 miles you could just go picku
Hi there, We are seeing the same thing... quite often. The units locks up somehow and starts transmitting garbage. I have asked Karlnet a number of times if this was something they were aware of, and
Hey Everyone, I have a little problem that someone here might have a solution to ;) I have a PtP TC bridge with 7 clients on the remote site, only 5 of these need access over the link, but my problem
Hi there, Ugly? Well the setup is like this: Main PtP link (A and B, 5 user), to point KN-205 (C) behind it with 2 links to brideing clients. Eace client has a sonicwall attached on the ethernet side
Reg, If Karlnet....YDI..... Terrabeam.... (even the sweet little lady picking up the phone gets confused! ;)) was ever to loose your clear cut analysis of problems and the costly SG-4300 recommandati
Hi Jayson, We would be willing to pick up all the KN-105s u have. What license are the boards loaded with? How many KN-105's do u have and price for all of them. Regards, Martin Madsen Bel AIr Intern
Guys, I know i dont have anything better to do that sit here look at my email....but it looks like all these messages have been posted over the weekend..... give them 10 sec. Martin Madsen Bel Air In