Jim This is correct it seems to be how KN is reading the numbers from the card and how its reported. From our in house tests all the links seem to be solid using the Prism 2.0 chipset just not report
Tony, How do I swap out or upgrade these Prism 2.0 cards you sold me? Your statement seems to indicate that they are worthless with Karlnet. Maybe I don't understand. Regardless, I'm having to climb
I was told they would work with the flashrom units but I have yet to get one to work with multiple flashrom units.. I have about 17 flashrom units out in the field and I tried the 100mW radios in jus
Nate To be fair the Prism 2.0 cards do work in the flashrom units but from what we have seen only one can be installed at a time, this is a problem with the TC code and not the cards. Sincerely Tony
Bill The cards do work with TC but the reporting info is not 100% again this is how TC communicates with the cards, the cards themselves work great. And when not being using with TC do report the cor
Thats the first I have heard that... So it is Karlnets fault I guess.... ;-) I am building another flashrom unit tomorrow.. I will test your theory then.... I kinda doubt it will pass the 10 reboot t
We installed a 100mW radio in an RG with an omni and testing it with TC. And the readings just jumped all over the place.. Changed it out with a 200mW and the readings where stable... So your saying
They don't work great Tony. They make the AP-1000 lock up about 10% of the time, which has been observed by at least 2 other people on this list. When I purchased them from you, you indicated that t
Bill, Are you referring to the prism 2.5 100mw cards? Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075 www.wirelessbroadbandsystems.com They don't work great Tony. They ma
Nate Correct this is what we have observed. Also, note the 200mW card you have is based on Prism 2.5 chipset as is the our newer 100mW card. In the test we have been running the jumping readings has
Nate Well I wouldn't say fault, just possible bug :) Software is every evolving, I am very eager to see how things operate with the new version once its out. I am very interested in your feed back. F
Bill To be clear the cards themselves outside of Karlnet have been work great with no problems, many of the cards are being used in standard 801.11b mode. Also from talking to customers, many not on
Tony, What do you think about this? http://wirelessbroadbandsystems.hypermart.net/100mw.htm Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075 www.wirelessbroadbandsystems.c
The remote side is an rg1000 running v4.02, with 9v POE, I have another rg1000, w/ v3.88 12v POE and the readings are good Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075
Dan Yes this looks like what we have seen. But if you look at the other side of the link, with a lucent card, did the power signal go up? If should have about 4-5dBm. Sincerely Tony Morella Demarc Te
Yes it appears the signal went up Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075 www.wirelessbroadbandsystems.com Dan Yes this looks like what we have seen. But if you l
Its strange, I can't identify the problem nor can I repeat it, that -94dBm just freaks me out Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075 www.wirelessbroadbandsystems
Dan can you confirm by how much? Sincerely Tony Morella Demarc Technology Group Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202 email: tony@demarctech.com http://www.demarctech.com Wireless
Ok here's an confirmed update. At this time all Prism 2.0 and 2.5 cards do not report noise level. So when looking at the readings the only valid one is the signal level. I have requested a change to
Its appears to be about 5dBm or so Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075 www.wirelessbroadbandsystems.com Dan can you confirm by how much? Sincerely Tony Morell