Hello All, For reasons I'm not going to get into, I've canceled my subscription to the Ten Tec User List and have joined the Orion User List. I am looking forward to an intelligent and constructive e
Hello All Got to make some room. Since buying the TT Orion in June of this year, the Jupiter has spent all of its time in its shipping container. I don't plan on ever using it again. Currently my sta
Uploaded 1.372 and Downloaded to Orion No runs, no drips, no errors. Good job TT and special thanks to the Beta Testers Thanks 73 John / N0KHQ / St. Louis Always on 18.130 Antennas: You can build 'em
When you uploaded the new software upgrade and extracted the .EXE file there was another file called "History.TXT" extracted also. John / N0KHQ _______________________________________________ TenTec
My Orion sweep isnt freezing at all when on the sub receiver and any or all of the buttons "NB", "NR", "Notch", "AN" are engaged (it use too though in 1.371). The sweep is still a few m/s slow though
How do you perform the "Ram" clear function and under what circumstances would you want to do a "Ram" Clear? Thanks John / N0KHQ _______________________________________________ Orion mailing list Ori
Hello All Still for Sale. I've had a lot of inquiries.............but no money. I have for sale a TT 538AT Jupiter in excellent condition with Built-in ATU, Knob upgrade kit and external fan...no mic
Thanks to all. John / N0KHQ _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
Hello All, Well, after using the Orion with Ver. 1.372 for a while, I am satisfied with the update (33 fixes) after 6 months and 23 or 24 beta versions. In "my opinion" there are 4 Orion issues that
I am posting this once again for those having RFI problems and believing that it is a problem with their transceiver. I apologize for the lengthiness. SDRs, You and RFI I have spent the last three ye
Hello All, For those that may not have seen a post by Paul Clinton with TT, I'll repost it here for your use. Orion Mic Wiring (Later Versions -around June of this year I believe, could be a little e
Hi Mark and Group, Using a mic with XLR such as the Goldline wire it as follows: XLR = Pin # 1 (shield/gnd) to mic connector case - this shield wire comes back out of the connector and is secured by
Man, been a busy day today. This is why you want to use a dedicated 115VAC circuit for you ham gear. I published this about 9 months ago on the Jupiter Yahoo Group, here it is again! How AC Noise is
Skip I understand you frustration with the Orion. My frustration with SDR's began with the purchase of the Jupiter about 3 years ago. I know you probably don't want to hear this, but, these rigs are
Part 2 We are talking RF Grounding here and only RF Grounding: Heres what you do. There should be only one point of connection for that wire running outdoors and that is at the wing nut on the back o
The wiring of the mic connector is probably incorrect. If the mic is wired according to the operators manual........its wrong. Check the recent archives for proper mic wiring to the Orion. John / N0K
Hi Skip, I understand you frustration with the Orion. My frustration with SDR's began with the purchase of the Jupiter about 3 years ago. I know you probably don't want to hear this, but, these rigs
Hi Mike, First, upgrade your rig to ver. 1.372. Before dumping the new version of software into the rig, perform the following: 1. Hold down the "VFO B" "LCK" button and power the Orion "ON" until "B
This message is being posted FYI I received this message from a CW operator friend. Message Start: There has been an issue for a long time that I am not sure is addressed yet. Sometimes when on CW an
Hello Group and Happy Holidays, Over the last year we have all sat at our comfortable operating positions reading email concerning Ten-Tec and the Orion. As this year comes to an end, I cant help to