- 1. Re: [Orion] AGC/NR Interaction? (score: 1)
- Author: Rein Couperus <rein@couperus.com>
- Date: Mon, 29 Nov 2004 23:32:00 +0100
- Was the s-meter reading going up or just the audio? On my qth which is very noisy at times (S 6-8 noise on the 4x40m loop) the S meter goes down to S3 when I use NR3, and the S/N ratio is improved ac
- /archives//html/Orion/2004-11/msg00040.html (8,173 bytes)
- 2. Re: [Orion] AGC/NR Interaction? (score: 1)
- Author: Joe Giacobello <k2xx@swva.net>
- Date: Tue, 30 Nov 2004 09:38:26 -0500
- Rein and Sinisa, thanks for your interest. I didn't look the S-meter when I was experiencing the problem and it seemed to me that the noise did not increase in proportion to the NR setting. I have ob
- /archives//html/Orion/2004-11/msg00043.html (8,175 bytes)
- 3. [Orion] AGC/NR Interaction? (score: 1)
- Author: Gary Tuck <gtuck@mac.com>
- Date: Tue, 30 Nov 2004 18:43:31 -0800
- Joe, I believe the manual states that you can expect the noise level to increase a bit in some circumstances when the NR circuit is engaged because the Threshold is lowered--the signal to noise level
- /archives//html/Orion/2004-11/msg00045.html (7,645 bytes)
- 4. Re: [Orion] AGC/NR Interaction? (score: 1)
- Author: Joe Giacobello <k2xx@swva.net>
- Date: Wed, 01 Dec 2004 15:32:02 -0500
- Gary, thanks for your input. What you describe may be a part of what I am seeing. Last night I was on 30M and I set the threshold at an acceptable noise level and then activated the NR. It seemed tha
- /archives//html/Orion/2004-12/msg00000.html (9,122 bytes)
- 5. Re: [Orion] AGC/NR Interaction? (score: 1)
- Author: Joe Giacobello <k2xx@swva.net>
- Date: Mon, 13 Dec 2004 09:44:46 -0500
- I have actually delayed the installation of the 1.372 firmware in my attempt to isolate the source of the AGC/NR interaction which I have described previously. Unfortunately, there seems to be no ide
- /archives//html/Orion/2004-12/msg00031.html (10,884 bytes)
This search system is powered by
Namazu