- 1. [RFI] 6 Minutes - a record? (score: 1)
- Author: Gerald Wolczanski <jerrywolczanski@earthlink.net>
- Date: Sat, 19 May 2012 20:14:02 -0400
- Scott (transistor@charter.net) assisted me in chasing down an RFI problem that was wiping out portions of the 40 meter CW band. I finally traced it to a sailboat dual-battery charger that was keeping
- /archives//html/RFI/2012-05/msg00030.html (7,074 bytes)
- 2. Re: [RFI] 6 Minutes - a record? (score: 1)
- Author: Gerald Wolczanski <jerrywolczanski@earthlink.net>
- Date: Mon, 21 May 2012 13:58:06 -0400
- I took the blades off the fan and hung it from its installation hook and, after an hour of running back and forth from the basement breaker panel - I found the interference was still there even after
- /archives//html/RFI/2012-05/msg00036.html (10,687 bytes)
- 3. [RFI] RFI cured with 1/4 wave wire (score: 1)
- Author: Gerald Wolczanski <jerrywolczanski@earthlink.net>
- Date: Thu, 18 Feb 2016 19:42:59 -0500
- It dawned on me that the noise levels on my little 30 meter transceiver were high, too high, and I began investigating and "Googling" various fixes. I wasn't hearing atmospheric noise...and my old st
- /archives//html/RFI/2016-02/msg00103.html (8,248 bytes)
- 4. [RFI] RFI cured with 1/4 wave wire (score: 1)
- Author: Gerald Wolczanski <jerrywolczanski@earthlink.net>
- Date: Sat, 20 Feb 2016 15:59:07 -0500
- Jim: I get the distinction between a lightning ground and an RF ground. In the case of an end-fed wire (that would be me) where a small portion of the antenna comes right into the shack, that seems t
- /archives//html/RFI/2016-02/msg00107.html (6,816 bytes)
- 5. [RFI] RFI cured with 1/4 wave wire (score: 1)
- Author: Gerald Wolczanski <jerrywolczanski@earthlink.net>
- Date: Sat, 20 Feb 2016 21:15:20 -0500
- Jim, I totally understand antenna return currents in an unbalanced antenna....having once built a vertical with 110 radials. My current 135' end-fed inverted-L is a superb performer with my fan of ra
- /archives//html/RFI/2016-02/msg00109.html (7,126 bytes)
- 6. [RFI] RFI cured with 1/4 wave wire (score: 1)
- Author: Gerald Wolczanski <jerrywolczanski@earthlink.net>
- Date: Sun, 21 Feb 2016 11:21:04 -0500
- "RF ground" OK - I get your point. When I say "RF ground" I mean a place for antenna return currents to flow Back to my original question: "Why did the installation of a 1/4 wave wire attached to gro
- /archives//html/RFI/2016-02/msg00112.html (7,646 bytes)
This search system is powered by
Namazu