I'm going back a few years when they had a much more limited product range and less competition. I'd never heard of Genasun until mentioned here - if that gives you a sense for the several years ago
GoWISE Power-On PS1003 Pure SINE Wave Inverter 2000w Cont/4000w Peak seems OK. I've only done casual testing with it in a Prius and an extension cord into the house - swapping appliances from time to
I have a Ampeak Smart Charger & have often run it in the radio room while on the air. I haven't noticed any RFI. You might also look at IOTA products. kd4e Hi, I found a bad battery charger at my nei
What about a battery with an analog trickle charger? The analog trickle charger should be RF-quiet. And wouldn't the battery isolate any PS RFI? David KD4E Update to the Spectrum Cable box testing, W
I can't tell from their page ... https://airspy.com/download/ Is SpectrumSpy available for Linux or limited to a MS version of windows? kd4e No connection to AIRSPY other than using their products. T
I want to replace the green LEDs (921 replacements) in my dash with RFI quiet dimmable green LED's 921. I am concerned about RFI from the bulb circuit. Should I be? If so, can anyone recommend a bran
Anyone have a guess as to the source of this noise? I'm hearing it on HF in SSB mode. Loudest on 160, loud on 80, 40, & 20. Starts to fade in 15 & 10. There, but really weak, on 6m. If I turn on the
Good point ... How about this? AM mode on 14.256 "http://nevils-station.com/stuff/sounds/20feb2020-14256-radiostatic2.m4a" kd4e For my purposes, I need it demodulated with an "envelope detector", thi
In our area bedrooms are required, in new construction, to have the AFCI (Awful Faulty Circuit Interrupters) installed. The justification for these quirky devices is to detect low-level failures in w
I just discovered that the 5v USB adapter I installed in my '86 Suburban is a RFI-monster. If the USB cable is anywhere near a radio it wipes-out SW. Has anyone found brands or specific models that b
Thanks! The principles there are good but his links to recommended products are now 5 years old. Manufacturing standards change real fast. I'm hoping for a product someone has purchased and tested re
The current noisy adapter provides a 5v 2.1a USB port for cellphone, and other device, charging plus a digital battery voltage display. It's also connected to a standard vehicle cigar/accessory plug.
I'm going to try this, in a metal case, with twisted wire and toroids on the input and output ... https://www.amazon.com/Converter-DROK-Regulator-Inverter-Transformer/dp/B01NALDSJ0/ref=sr_1_3 Actuall
While testing a just-arrived TOBSUN 50W DC-DC Converter (Model: EA50-5V, 12-24v In 5v out) I discovered it to be RF-clean but the generic 12v voltage display in the 12v distribution panel (two access
It would be interesting to know the manufacturer and model - because if they have it many others may as well - and that could become a problem we need to get ahead of. I'm sure their sound person wil
I have found that posting an embarrassing note to Twitter, copied to Corporate, has repercussions up the food chain - they're terrified someone with a major follower-count will re-tweet and they hate
And it's powered from a byproduct of ancient dinosaur dung ... ;-) I will never let go of my 1949 Norge gas range. Rob K5UJ _______________________________________________ RFI mailing list RFI@contes
A USB isolator is cheap online. Now in thinking of RF issues of RF getting into it. Where would be the best placement of it to lessen the possibilities of RF getting into it? Having it right at the c
Didn't find the exact same one as mine (I paid less) but a duckduckgo.com Search located this one which looks the same: https://www.amazon.com/Nobsound-Audio-Eliminator-Industrial-Protection/dp/B07GB
https://www.amazon.com/Integrated-Fixture-Linkable-Fluorescent-Replacement/dp/B07TYJ22QJ/ I need a few around the radio room and shop and 3', 15w, 1500 lumens @6000k meets the need well. I know I sho