- 21. Re: [RFI] 30 M Shuts Down Internet Cable Modem (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Mon, 25 Mar 2013 22:21:39 -0500
- One thing to look at would be the power cube that feeds the modem. There are a couple of things to try. One would be to wrap as many turns of the IN and OUT wires around toroid cores. Jim Brown would
- /archives//html/RFI/2013-03/msg00121.html (9,641 bytes)
- 22. Re: [RFI] 30 M Shuts Down Internet Cable Modem (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Mon, 25 Mar 2013 22:43:58 -0500
- You could just cut the wires on the wall warts and wire the correct plug onto a different wall wart. You don't even need to solder the connections ...just twist the wires for a test. You aren't riski
- /archives//html/RFI/2013-03/msg00123.html (11,009 bytes)
- 23. Re: [RFI] LED Under Cabinet Kitchen Lights YES or NO (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Fri, 26 Jul 2013 17:58:41 -0500
- I just use Lutron dimmers mounted in place of the wall switches that turn the under-cabinet lights on and off. I have almost two dozen Lutron dimmers (from Home Depot) mounted all over the house and
- /archives//html/RFI/2013-07/msg00026.html (11,621 bytes)
- 24. Re: [RFI] Ferrite Question... (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Fri, 20 Jun 2014 15:46:33 -0500
- There are two possibilities. One is what Jim Brown suggested about a large change in impedance that is not being properly matched. Another possibility is that somehow the balun/core has changed the a
- /archives//html/RFI/2014-06/msg00123.html (10,205 bytes)
- 25. Re: [RFI] RF getting into 4-port wirelss router. (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Sun, 11 Jan 2015 22:35:56 -0600
- It seems to me that something other than the CAT-5 cable and/or router is at fault. As a general rule, I have never found CAT-5 to be very sensitive to RF ingress. Are you using some kind of cheap CA
- /archives//html/RFI/2015-01/msg00049.html (11,663 bytes)
- 26. Re: [RFI] RF getting into 4-port wirelss router. (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Mon, 12 Jan 2015 09:50:59 -0600
- Ken: One thing you could do would be to transmit into a good dummy load. This should eliminate the question of whether or not the interference is coming from your RF radiation from the antenna. -- We
- /archives//html/RFI/2015-01/msg00065.html (10,612 bytes)
- 27. Re: [RFI] Light fixtures (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Fri, 1 Jul 2016 21:05:56 -0500
- Thanks for all the info on LED lighting. -- Wes Attaway (N5WA) (318) 393-3289 - Shreveport, LA Computer/Cellphone Forensics AttawayForensics.com -- Consider LED strips from Wired Communications, but
- /archives//html/RFI/2016-07/msg00004.html (8,954 bytes)
- 28. Re: [RFI] led bulbs? (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Thu, 29 Sep 2016 08:11:31 -0500
- Just do a Google search for "RFI-quiet LED bulbs". -- Wes Attaway (N5WA) (318) 393-3289 - Shreveport, LA Computer/Cellphone Forensics AttawayForensics.com -- Was there someone who made a list of quie
- /archives//html/RFI/2016-09/msg00112.html (8,276 bytes)
- 29. Re: [RFI] desktop mini PC (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Mon, 12 Dec 2016 14:58:43 -0600
- I have been using StarTech 4-port USB3 hubs with my laptops for several years. They work great and are inexpensive. Occasionally some peripheral doesn't like to be on a shared port but that doesn't h
- /archives//html/RFI/2016-12/msg00045.html (10,092 bytes)
- 30. Re: [RFI] computer screen rfi (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Fri, 23 Dec 2016 07:41:13 -0600
- If this is a brand new problem with equipment that you have already been using then I would suspect radiation from one or more cables (maybe a loose connector), or maybe the "new" location of some pi
- /archives//html/RFI/2016-12/msg00065.html (9,032 bytes)
- 31. Re: [RFI] USB qrm - what to do? (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Mon, 13 Mar 2017 09:11:37 -0500
- Pete ... does every device add noise, or is it a specific device? Maybe you have done this, but you didn't specify this in your post. I would unplug them (and/or turn them off) one at a time, and the
- /archives//html/RFI/2017-03/msg00022.html (9,606 bytes)
- 32. Re: [RFI] Noise blanker recommendation (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Sun, 22 Oct 2017 21:51:25 -0500
- It would be a lot less expensive to find the noise source and then fix the problem. -- Wes Attaway (N5WA) (318) 393-3289 - Shreveport, LA Computer/Cellphone Forensics AttawayForensics.com -- --Origin
- /archives//html/RFI/2017-10/msg00024.html (8,628 bytes)
- 33. Re: [RFI] RFI In My Shack (score: 1)
- Author: Wes Attaway <wesattaway@bellsouth.net>
- Date: Sat, 02 Dec 2017 21:32:07 -0600
- I use 2 OCF antennas, coax fed with proper feed point baluns. I have zero rfi even with AT&T router, network cable, 3 computers and a tv set all within a few feet of each other. I would not be too
- /archives//html/RFI/2017-12/msg00022.html (11,258 bytes)
- 34. Re: [RFI] LED lights to avoid (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Sun, 28 Jan 2018 16:43:47 -0600
- I recently converted about 30 ceiling floods to LED. I used the Phillips brand 90W bulbs and I have not noticed any noise. -- Wes Attaway (N5WA) (318) 393-3289 - Shreveport, LA Computer/Cellphone For
- /archives//html/RFI/2018-01/msg00117.html (8,480 bytes)
- 35. Re: [RFI] LED Yard Light (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Tue, 30 Jan 2018 10:50:28 -0600
- I am using Phillips 90W floods indoor and outdoor and have not noticed any noise from them. I have also used some 60W GE "Reveal" bulbs in the eave/soffit outdoor receptacles. I have not noticed any
- /archives//html/RFI/2018-01/msg00131.html (7,851 bytes)
- 36. Re: [RFI] Smoke Detectors Beeping (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Fri, 27 Jul 2018 13:19:25 -0500
- Stan .... you will probably get a lot of different responses. Here is one. I use some smoke detectors made by BRK, Model 41208. I think I bought them at Home Depot. They have never shown any sign of
- /archives//html/RFI/2018-07/msg00122.html (10,093 bytes)
- 37. Re: [RFI] Dimmer control (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Mon, 11 Feb 2019 13:20:40 -0600
- I have quite a few Lutron dimmers around the house and have never noticed any problems. I purchased them from Home Depot. -- Wes Attaway (N5WA) (318) 393-3289 - Shreveport, LA Computer/Cellphone Fore
- /archives//html/RFI/2019-02/msg00031.html (8,576 bytes)
- 38. Re: [RFI] Using #31 material for HF transmit baluns (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Mon, 11 Feb 2019 17:19:06 -0600
- Jim Brown has ton of info about this on his AudioSystemsGroup web site. -- Wes Attaway (N5WA) (318) 393-3289 - Shreveport, LA Computer/Cellphone Forensics AttawayForensics.com -- A couple of weeks ag
- /archives//html/RFI/2019-02/msg00035.html (7,695 bytes)
- 39. Re: [RFI] Bonding to a PC (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Thu, 28 Feb 2019 15:21:23 -0600
- Pete: There are computers and then there are computers. I think the best thing to do is to take a look at yours to see where the metal is, and whether or not you can make an attachment to a screw tha
- /archives//html/RFI/2019-02/msg00085.html (8,170 bytes)
- 40. Re: [RFI] SolarEdge Finds New Source of Solar System RFI (score: 1)
- Author: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
- Date: Mon, 3 Jun 2019 11:28:26 -0500
- Ed .... please keep us posted on results. -- Wes Attaway (N5WA) (318) 393-3289 - Shreveport, LA Computer/Cellphone Forensics AttawayForensics.com -- There are a number of possibilities here. Yes, the
- /archives//html/RFI/2019-06/msg00011.html (14,379 bytes)
This search system is powered by
Namazu