- 1. [RFI] Dimmer Behavior (score: 1)
- Author: Dan K2YWE <dan.k2ywe@gmail.com>
- Date: Thu, 10 Mar 2022 15:03:05 -0500
- I just replaced a chandelier that had 5 LED candelabra base 4-element LED lamps in it (the ones shaped like flames). It worked fine for years with our ancient Leviton dimmer (up-down buttons and litt
- /archives//html/RFI/2022-03/msg00000.html (7,214 bytes)
- 2. Re: [RFI] Dimmer Behavior (score: 1)
- Author: Jim Brown <jim@audiosystemsgroup.com>
- Date: Thu, 10 Mar 2022 12:50:09 -0800
- I've been using Lutron dimmers with FEIT- and Phillips-branded LED bulbs for a few years. Lutron has a pretty good reputation for being relatively free of RFI, but I can't testify to that for these d
- /archives//html/RFI/2022-03/msg00001.html (7,410 bytes)
- 3. Re: [RFI] Dimmer Behavior (score: 1)
- Author: Dan K2YWE <dan.k2ywe@gmail.com>
- Date: Thu, 10 Mar 2022 16:18:10 -0500
- Thanks JIm, The Feit lamps have proven EMI-free for me here. The lamps are upstairs in a wood frame house with radios in basement and antennas outside less than 100 feet away. I see that Lutron dimme
- /archives//html/RFI/2022-03/msg00002.html (8,181 bytes)
- 4. Re: [RFI] Dimmer Behavior (score: 1)
- Author: Dale <svetanoff@earthlink.net>
- Date: Fri, 11 Mar 2022 05:27:45 +0000
- Jim and All, My house was built in 2000 and has several Lutron dimmers in it (all 3 bedrooms, living room, family room). I have never had RFI from any of the dimmers, largely because I do not use
- /archives//html/RFI/2022-03/msg00004.html (9,685 bytes)
- 5. Re: [RFI] Dimmer Behavior (score: 1)
- Author: Gary Johnson via RFI <rfi@contesting.com>
- Date: Fri, 11 Mar 2022 09:15:46 -0800
- I experienced exactly that oscillatory behavior when multiple LED fixtures were connected to ANY model of dimmer. The problem was induced by adding commercial EMI filters to each fixture. There was n
- /archives//html/RFI/2022-03/msg00005.html (9,773 bytes)
- 6. Re: [RFI] Dimmer Behavior (score: 1)
- Author: Mike King - KM0T <scsueepe@mtcnet.net>
- Date: Fri, 11 Mar 2022 11:22:22 -0600
- Just FYI, lots of newer dimmers require a minimum load to work properly so when u replace incandescent with led, things dont always work good. Try all leds except one or two regular lamps to keep a l
- /archives//html/RFI/2022-03/msg00006.html (10,369 bytes)
- 7. Re: [RFI] Dimmer Behavior (score: 1)
- Author: Dan K2YWE <dan.k2ywe@gmail.com>
- Date: Fri, 11 Mar 2022 15:23:06 -0500
- I completely understand the minimum load problem and it came to mind immediately, but I assumed it was because of the old design. I'll be quite dismayed if a new dimmer has the same problem. Sheesh!
- /archives//html/RFI/2022-03/msg00007.html (11,407 bytes)
This search system is powered by
Namazu