- 1. [RFI] Enphase (score: 1)
- Author: Carl Foster <carlfoster@cactuscomm.net>
- Date: Thu, 25 May 2023 11:21:48 -0700
- I told the solar salesmen selling Solar Edge to pound sand and never return. Another salesman came by and had a low-pressure approach. His company uses Enphase inverters and distribution equipment. H
- /archives//html/RFI/2023-05/msg00024.html (6,900 bytes)
- 2. Re: [RFI] Enphase (score: 1)
- Author: Don Kirk <wd8dsb@gmail.com>
- Date: Thu, 25 May 2023 14:48:17 -0400
- Hi Carl, A home in my subdivision 0.2 miles away from mine had an Enphase system installed a few months ago. I did park about 400 feet from his house and using my portable HF gear there was nothing o
- /archives//html/RFI/2023-05/msg00025.html (7,547 bytes)
- 3. Re: [RFI] Enphase (score: 1)
- Author: Don Kirk <wd8dsb@gmail.com>
- Date: Thu, 25 May 2023 15:41:53 -0400
- Hi Carl, I just contacted the homeowner with an Enphase system and he would not give me permission to enter his property so I told him I would just make measurements from the street in front of his h
- /archives//html/RFI/2023-05/msg00026.html (8,389 bytes)
- 4. Re: [RFI] Enphase (score: 1)
- Author: Mark Schoonover via RFI <rfi@contesting.com>
- Date: Thu, 25 May 2023 12:57:58 -0700
- Carl, I had an 8KW, 32-panel Enphase system on my previous home. My HF antenna, MFJ Cobweb, was installed about 8' away with zero RFI. Some of my coax runs were within a foot of the panels too. Very
- /archives//html/RFI/2023-05/msg00027.html (8,136 bytes)
- 5. Re: [RFI] Enphase (score: 1)
- Author: Alan Higbie <alan.higbie@gmail.com>
- Date: Thu, 25 May 2023 15:09:28 -0600
- I have a next door neighbors Enphase system within 50-60 feet of my tower. There is definite RFI the system . . . but it is only noticeable on the higher HF bands (15-12-10 and maybe 6 meters). Ive g
- /archives//html/RFI/2023-05/msg00028.html (11,298 bytes)
- 6. Re: [RFI] Enphase (score: 1)
- Author: Don Kirk <wd8dsb@gmail.com>
- Date: Fri, 26 May 2023 14:25:52 -0400
- Hi Carl, The home 0.2 miles away in my subdivision has an Enphase system with the following specs. DC system size: 6.32 KW AC system size: 4.64 KW Module Type (must be the panels as he has 16 panels
- /archives//html/RFI/2023-05/msg00029.html (10,451 bytes)
- 7. Re: [RFI] Enphase (score: 1)
- Author: K9MA <k9ma@sdellington.us>
- Date: Sun, 28 May 2023 15:35:09 -0500
- My next door neighbors installed an Enphase system last year. I had the installer put ferrite cores on the wiring. The system is about 20 meters from my tower. I've detected no RFI from it. Whether t
- /archives//html/RFI/2023-05/msg00030.html (9,783 bytes)
- 8. Re: [RFI] Enphase (score: 1)
- Author: Henk Remijn PA5KT via RFI <rfi@contesting.com>
- Date: Mon, 29 May 2023 18:47:43 +0200
- I have Enphase IQ7A and IQ7+. The inverters are not adding any noise to the already existing noise from the house on 40m and higher frequencies. I dot not use 160 and 80 at daytime. My 10/15/20 beam
- /archives//html/RFI/2023-05/msg00031.html (8,095 bytes)
This search system is powered by
Namazu