- 1. [RFI] GFI Outlets (score: 1)
- Author: "Jim Brown" <jim@audiosystemsgroup.com>
- Date: Sun, 25 Jul 2004 11:36:10 -0500
- Here's a new one (for me, at least). I've always been a medium power guy -- 100 watt barefoot radios have been my standard for 49 years -- but I recently bought a Ten Tec Titan amp (legal limit out)
- /archives//html/RFI/2004-07/msg00182.html (8,011 bytes)
- 2. RE: [RFI] GFI Outlets (score: 1)
- Author: "Dan Violette" <danki6x@earthlink.net>
- Date: Sun, 25 Jul 2004 19:05:34 -0700
- I used to pop the GFIs in my old house. Large ferrite beads: type 77 I think or type 73 (whichever the beads come in), 1/2 inch long about, just fit over A/C wire, forget # but could look up again. T
- /archives//html/RFI/2004-07/msg00183.html (8,876 bytes)
- 3. Re: [RFI] GFI Outlets (score: 1)
- Author: "Michael Tope" <W4EF@dellroy.com>
- Date: Sun, 25 Jul 2004 20:49:06 -0700
- I haven't had any GFI's fail, Jim at least none that I have been able to positively correlate with RFI (I had one fail in the kitchen, but I am not positive that it was RFI induced). I did, however,
- /archives//html/RFI/2004-07/msg00184.html (9,250 bytes)
- 4. [RFI] GFI Outlets (score: 1)
- Author: "Gary \"Joe\" Mayfield" <gary_mayfield@hotmail.com>
- Date: Wed, 17 Aug 2005 05:37:46 -0500
- I finally got something up in the air, not much just a 20' high dipole on 40 meters. It loads up fine, and I can hear a suprizing amount of stuff on the band, but when fed with 100 Watts it trips abo
- /archives//html/RFI/2005-08/msg00046.html (6,967 bytes)
- 5. Re: [RFI] GFI Outlets (score: 1)
- Author: "Howard Lester" <hlester@mmto.org>
- Date: Wed, 17 Aug 2005 07:49:40 -0700
- 40 the outlets I had the same problem with the first dipole I installed on the roof of my former house. NOt only did the GFI trip on 17m; smoke was coming out of it. I solved the problem by moving t
- /archives//html/RFI/2005-08/msg00049.html (7,473 bytes)
- 6. Re: [RFI] GFI Outlets (score: 1)
- Author: "Jim Brown" <jim@audiosystemsgroup.com>
- Date: Wed, 17 Aug 2005 10:41:23 -0500
- I wouldn't. I can run a KW on 160-10m into wire dipoles and long wires that are within 20 ft of several GFI's. When I first fired up the KW, one was constantly tripping, and eventually smoked. I repl
- /archives//html/RFI/2005-08/msg00051.html (7,805 bytes)
- 7. Re: [RFI] GFI Outlets (score: 1)
- Author: "Howard Lester" <hlester@mmto.org>
- Date: Wed, 17 Aug 2005 08:51:25 -0700
- Hi Jim, I was basing my suggestion on the fact that not just one GFI was tripping, but a bunch of them, which would be telling me I'd better move further away from the house wiring. But as usual, I
- /archives//html/RFI/2005-08/msg00052.html (6,981 bytes)
- 8. Re: [RFI] GFI Outlets (score: 1)
- Author: "Leigh L Klotz, Jr." <Leigh@WA5ZNU.org>
- Date: Wed, 17 Aug 2005 09:49:35 -0700
- Does anybody put ferrites in the walls during construction? Leigh / WA5ZNU _______________________________________________ RFI mailing list RFI@contesting.com http://lists.contesting.com/mailman/list
- /archives//html/RFI/2005-08/msg00053.html (6,886 bytes)
- 9. Re: [RFI] GFI Outlets (score: 1)
- Author: Dan Violette <danki6x@earthlink.net>
- Date: Wed, 17 Aug 2005 12:08:18 -0700 (GMT-07:00)
- Joe, I would slip a ferrite bead on each insulated wire (black, white) and the problem would go away. I forget the size and mix designation (about 1/2 inch long, just big enough hole for wire, HF mix
- /archives//html/RFI/2005-08/msg00054.html (8,963 bytes)
- 10. Re: [RFI] GFI Outlets (score: 1)
- Author: "Dan Violette" <danki6x@earthlink.net>
- Date: Fri, 19 Aug 2005 20:24:40 -0700
- I found my RFI Kit. They change them every once in a while, mine (have gotten 2 over the years) are a few years old, but similar to what you found on their website. I have replaced items individually
- /archives//html/RFI/2005-08/msg00087.html (11,073 bytes)
This search system is powered by
Namazu