This is from Alan with a rover map. Hi Tad, I saw your post on the reflector about the GQP. I've put together a map of rover activity I'm aware of. It includes K5YAA, W3DYA, KN4Y, N5NA, and AD8J. The
I have a Yaesu FT-857D, Separation Kit, ATAS-120 antenna, Comet antenna mount, Yaesu MH-59 remote control microphone Below are the current prices from Gigaparts: FT-857D Radio $806 YSK-857 Separation
I have a Yaesu FT-857D, Separation Kit, ATAS-120 antenna, Comet antenna mount, Yaesu MH-59 remote control microphone Below are the current prices from Gigaparts: FT-857D Radio $806 YSK-857 Separation
Normally, by this time, I'm seeing all kind of emails about the upcoming GA QSO party, but it seems much more subdued this year. I'm not complaining, just wondering why the interest seems to be down.
I've acquired a 12 element 2 meter yagi that I'm refurbishing (hey it was almost free and I like tinkering). The rear 5 or six elements are phased like a log periodic with the feed/phasing lines cros
According to several folks it is a KLM. I've emailed M2 to see if they still have an archive of the old KLM manuals. Thanks for all the replies. 73, Tad, WF4W -- "What a long, strange trip it's been"
This the link to the entire tower folder, but the new folder with everything up is G_AntennaFullyUp: https://www.dropbox.com/sh/dwg83pi20f5qbny/G6PrLmCOs9 I still will be putting up a different 6 met
or I might consider a trade....what do you have? I purchased this a couple of years a go and never put it up. I have two 6 meter yagis that work on the tilt-up tower better. This is a link to the Cub
I purchased this a couple of years a go and never put it up. Here are the specifications: *FG= 17dbi, @ 40ft; F/B > 30db* *Direct feed with 50 Ohm coax; 50.2 MHz.* *Rugged all weather construction.*
If you have one of these laying around and could bring it to the meeting tonight, I will gladly take it off your hands. I have the outside relay box, but haven't been able to find the control box yet
I purchased this a couple of years a go and never put it up. Here are the specifications: *FG= 17dbi, @ 40ft; F/B > 30db* *Direct feed with 50 Ohm coax; 50.2 MHz.* *Rugged all weather construction.*
I had great luck with a GAP Challenger several years ago and I'm looking for another one so I can play with the diversity reception capabilities of my K3. I would like to find a used Challenger, but
I've been watching the news over there and talking with friends and former co-workers....boy is it a mess. I hope all of you are all OK. We got around 3 inches of snow at the house in Hillsboro and I
The ATAS antenna and mount have been sold. So here is what is available: I have a Yaesu FT-857D, Separation Kit, Yaesu MH-59 remote control microphone Below are the current prices from Gigaparts: FT-
Our home in Marietta is for sale and it has a radio room with 220 for your amp, a work bench for your rig(s) and antenna connectors(2) going to the outside. There is also a 2m/440 aluminum J-Pole in
At the suggestion of another member of the SECC, I thought I would provide this information. I know many of you chase DX along with contesting. C82DX will be on the air in mid-October for 11 days, co
I've decided to go in a different direction for a tower at Whippoorwill Ridge, out here in the woods. I have 90' of aluminum tower. The top two sections were cut apart(wrong) and will not go back tog
--*Tennadyne TD-160HP800 folded dipole* unused/never up, still in the box. 160-10meters continuous. 160 feet long. Includes assembly manual Power ratings: 8 KW Impulse (CW) 2400W PEP SSB 800W AM/FM/R
I will have the following items for sale at the hamfest: --*Tennadyne TD-160HP800 folded dipole* unused/never up, still in the box. 160-10meters continuous. 160 feet long. Includes assembly manual Po