Configuration Woes...alive and well here. Trying to get TR working with my TS-870S but have some glitches. Previously, I hooked up WriteLog with a W1GEE parallel port adaptor loaned to me...plugged e
For the ARRL CW DX Contest, is there a toggle option for TR to automatically pre-fill the exchange window with the STATE based upon the callsign entered in call window? And, to do so, is there a Mast
Several Questions for you TR Gurus: 1. The Shift Key/RIT is now working here, but I can't seem to find the details on how to REVERSE the RIT direction, and also change the amount of incremental RIT s
Mirko - S57AD kindly replied: Hi Eric, if you have TRMASTER database with QTH entries for the US stations, TR fills QTH (state) automatically. Just set INITIAL EXCHANGE = QTH (within Ctrl-J menu). If
It looks like I will need to interface TR with an Icom 765 and maybe a TS-830S (backup if the 765 takes a dump) instead of my TS-870S for a particular operation. I'm NOT an ultra "techie", and must c
Many TNX to all who have replied including directly. And... Igor - UA9CDC kindly responded: Here is my example: radio one type = IC765 radio one receiver address = 44 radio one control port = serial
RE: My Alternative Voice-Keying Approach "Crusade" I've put up a Flash Audio DEMO at and related stuff at: http://www.k6vva.com Listen & Then Decide If It's Right For You. For those who are intereste
For the SSB Contest "Speed Kings" who may find my initial online demo a bit slow, I just added a "Hot Rod" version. http://www.k6vva.com 1. Click your REFRESH button 2. Got to the "Hot Rod" link at t
K6VVA had previously communicated: Ooops...in putting together the quick demo, I forgot the "Prec" ;-( No problem...it can go on the front of the .wav file #3. -VVA __________________________________
Mark, N5OT brilliantly proposed: Hello gang. I would like to put the following on the wish list. I have gotten more serious about SO2R this year, and the way I use TRlog, it would be very helpful to
The manual says that Shift Key Enable (to adjust RIT Frequency from the keyboard) works with of Kenwood and "some Yaesu rigs". I sure would like to know if an FT-1000 (any version thereof) will work.
I just tried out the Auto-CQ (ALT + Q) function, but each time it repeats, the WPM speed also increases. Here are my config lines: CQ MEMORY F1 = CQTEST \ \ TEST CQ MEMORY F2 = CQ CQ TEST \ \
Hmmm...other CTRL + (somekey) things work, but not CTRL + O. I made a bunch of QSO's in the Simulator with about 95 different Mults. Tried CTRL + O in both Simulator mode & switch it to False & reloa
I had previously written: Hmmm...other CTRL + (somekey) things work, but not CTRL + O. I made a bunch of QSO's in the Simulator with about 95 different Mults. Tried CTRL + O in both Simulator mode &
OK...I made the speed-down changes to equalize the WPM back to the starting point. But I kept doing some testing. It works fine UNLESS you ESC out of the Auto-CQ and subsequently do an ALT + C to res
At 03:58 AM 1/8/04 -0800, Jim Smith VE7FOwrote: The purpose of CTRL-O is to give you a list of the calls you have worked on, in this case, 4 bands. i.e. if you have worked P40B on 10, 15, 20, and 80
At 03:58 AM 1/8/04 -0800, Jim KI7Y wrote: What is happening is each time the character speeds the CW up, the next CQ speeds it up again, and again . What it requires is the same decrease in speed aft
First of all, I'd like to say TNX to ALL who have been so kind to respond so promptly to my recent CTRL+O and Auto-CQ SpeedUP posts (including the author-Tree)!!! What a great group of helpful guys h
At 05:04 PM 1/8/04 -0800, you wrote: I have found the same problem, even with the same number of ^F and ^S so I have given up trying to change the speed of parts of the message. If any of you are abl
Well, I decided to try putting TR on an older WIN95 Notebook tonight before the NCCC pre-NAQP test run. This was a disaster for me, as was getting some erratic behaviors...like things blinking on & o