I ran into something strange this weekend in setting up for the wpx contest. For some reason when in cq mode, if the call is typed into the field and enter press, the call and exchange are sent as no
Thanks to Jim and Tim for replying to my original post indicating that this is "how it is supposed work". Well this "feature" can be a real liability in some circumstances, and having some way of tur
What we did at VE7SV to get around this, is we assigned pairs of function keys to each operator, and had each op record his messages on his assigned fkeys. While only the op who had f1 assigned to hi
I finally had a chance to experiment with v6.72 and the ts940. As some may remember, the new version of TR caused the audio to jump in steps as one tuned through a signal, rather than a smooth change
Last weekend had my first chance to try out version 6.72. First the good news. Some will remember my reporting clock issues. I had a chance to narrow it down. It seems that if a radio is specified fo
As Mark was kind enough to point out, the steps are probably larger than 10hz which is probably the resolution of the rig. I haven't been able to measure the exact magnatude of the sets, but whatever
I take it that addresses the clock issue, but not that audio issue. I would be curious to know if anyone is using the PIEXX board in their 940 rather than the IF10b and if they have the same difficul
According to the rules for the upcoming 160 meter contest, multi op stations are supposed to indicate the actual operator for each Q. Anyone have any suggestions as to the best way to do this with TR
In case anyone else is interested, I received the following from Dave K4JRB, the CQWW 160 contest Director. cheers, Paul - VA7NT ex VE7CQK - email: paule@sfu.ca "Those who hear not the music. . . thi
This last weekend during the 160 meter contest, I discovered that if the multi port is enabled, you cannot get the packet window to stay open, (We had one of the networked computers setup specificall
The latest version 6.72 still has clock problems when using the kenwood rig interface. While I have not tried it in all the configurations that have had trouble with 6.71 etc, I quickly tested it in
I need to find a packet program that can interface with TRlog. Please note, that I need one that will run packet off a 2 meter radio, not one that relies on an internet link. Ideally, the output coul
Hi there, I have run into this problem in a variety of setups. Version 6.71b has problems in dos mode in Windows 98 (pentium I), and straight dos 6.22 on a 386 machine. I found that the clock would r
Hi there, I have run into this problem in a variety of setups. Version 6.71b has problems in dos mode in Windows 98 (pentium I), and straight dos 6.22 on a 386 machine. I found that the clock would r
Hi Bill, Thanks for the reply, it turns out the problem was the software... very strange, but true. Changing to a different version fixed the problem. cheers, Paul - VA7NT cheers, Paul - VA7NT ex VE7
Hi there, I think you will need to get the older 8088 version of the program to get it to work on you HP200. I use the 8088 version on my poqet, with no difficulty. cheers, Paul - VA7NT cheers, Paul
Hi there, As far as I know the latest 8088 version was 6.10, which I have somewhere. If there is a later version, I would love to have it. If anyone needs the version I have, I will try to arrange to
Hi Tree, Thanks for this effort. I assume this scaled down version will not work with older cpu's such as 8088s etc. cheers, Paul cheers, Paul - VA7NT ex VE7CQK - email: paule@sfu.ca "Those who hear
Has anyone been able to configure a laptop/pcmcia-serial adapter to work in dos mode with TR for radio control etc??? cheers, Paul - VA7NT ex VE7CQK - email: paule@sfu.ca "Those who hear not the musi