Hello All, Ran latest version of TR during CQWW CW this past weekend, as S/O HP. Used two radios for the first time, and everything worked flawlessly. Had a funny problem with SCP. The Super Check Pa
In a related situation, TR was not putting in the zones for me as I typed in call signs. Do I have to throw a switch somewhere? The manual says that it checks the cty.dat and one of the .dom files fo
You shouldn't have to do anything special. The other op at the "fun" M/M in which I participated this past weekend reported the same problem, although I never saw it. Doc N7DR - -- D.R. Evans N7DR /
You are running low on memory - look in the upper right corner of the screen and see how much memory you have. TR-Log only uses the base 640K of memory on the computer and if memory starts getting lo
Did this happen on every QSO? What process do you use to enter and log a contact? Ie. 1. typed callsign in call window 2. hit enter key (exchange info is filled in and a dupe check is performed) 3. c
You typed in the call and then hit RETURN? This should result in the zone appearing in the exchange window. If the cty.dat file is either in the active directory, or the same directory as the TR.EXE
I got low memory problems when I had removed the line DOS=HIGH,UMB from my config.sys (don't ask me why I removed it). DOS was sitting in the memory area where TR wanted to put QSO data. -- 73, Udo d
Geo, You were right! Solved the problem! I load TR using a batch file, which also loads DVP-TSR into conventional memory. When I REM'ed out the TSR command, SCP worked just fine. For contests like CQ