Toward the end of my operating in ARRL DX SSB, I noticed that the program was no longer displaying the current frequency on the screen. By habit I change bands on the radio (a TS-850), and the progra
Dave, I think I went back a version because of some frequency logging problems and in the one back version every once in a while I noticed a loss of frequency info and I rebooted. Maybe during the DX
Author: "Kenneth E. Harker" <kenharker@kenharker.com>
Date: Wed, 16 Mar 2005 15:13:57 -0800
Do you have: FILTER RADIO MESSAGE LENGTH = TRUE in you configuration? Whenever I get wierd radio control behavior, I usually find I've forgotten that setting (which really should be TRUE by default,
Regarding the entry not showing up in the bandmap...I would guess that you do not have display dupes enabled. Are you sure it does not show up with a spacebar entry? I am using a rather back level ve
With 6.79 & TS-950S here, the program will stop showing the frequency display for the radio while I tune the radio. A little while after I stop tuning the radio, the program then displays the frequen
The problem here is that the Kenwood radios can't chew gum (report their frequency over the serial port) and walk (QSY up/down the band with the VFO knob) at the same time. As you increase the timeou
N6TR lamented: Roger. Grrrrr. It's been so long since I used this 950, I seem to have forgotten it will have behaved this way all along - as well as others having to put up with, though maybe it's mo
The radio does not respond to the requests for frequency information when the VFO knob is being turned. It saves them all up until the knob stops turning, then all of them get responded to. So - TR
This never seemed like an issue with my 950SDX. I just measured the delay between the time I stopped turning the dial, and TR updating the frequency. With 6.69 (my version-of-choice), it's never mor
N6TR added: If I increase KENWOOD RESPONSE TIME, things seem to get better, but there is still variability in the amount of time that the program recovers from a period of tuning the rig, with that a
In talking directly with N2IC: 73, VR2BrettGraham _______________________________________________ Trlog mailing list Trlog@contesting.com http://lists.contesting.com/mailman/listinfo/trlog
I usually use a TS850, but have a TS690. I have tried the TS690. With TR6.79 and KENWOOD RESPONSE TIME 100, TS690 works as follows. TS850 seems to work like the TS950. When tuning, compared to TS690,
JI1RXQ added: I have now tried an earlier version of TR & based on the various reports made here, it does appear as if older Kenwoods behave better if not polled unnecessarily. It would probably be h
The "old" Kenwoods are actually quite happy being polled frequently as long as you look for a response before you poll again. The 6.73 and 6.74 versions would poll at a default rate of 100ms and cons