I was there in Sep, 1966 and left in June of 67 and did BED and ECM sets, then to Beale AFB ,(B52-g's) back to Keesler in 1968 for a week to pick up the pods, then off to Osan Korea for a 6 month sta
My experience tells me that there is a concernable difference in ones ability to audibility and accurately "zero beat" a given signal. Unless one can observe the difference in beat of the two signals
Years ago My Dad used to be a flight engineer on a C-124 Globemaster. These aircraft had 4 large piston radial engines. I can still tell if a C-124 is flying over head by the resonance and throb to t
I hear the story on microphones for Dolly Parton is that here voice is so hi pitch that she goes in a tries a couple dozen of the exact same microphone and finds the 1 or 3 that don't resonate with h
reguarding the back up battery. is this a rechargable setup, as was covered here a couple of days ago. some are rechargable and some are not, so if you put in a no rechargable battery in the recharga
That's what I was talking about.. don't toast your breand new old rig.. thanks guys.. tom N6AJR In a message dated 1/14/2006 2:35:58 P.M. Pacific Standard Time,k4beh@juno.com writes: Hi Tom and Jim,
I hired an electrician to do mine, as I am pretty much disabled and do good walking to the mail box and back. I had two 20 amp and one 15 amp circuits existing, and added 2 new pieces of romex, ( I t
I use W4MPY the QSL man, I have got several orders from him and am quite satisfied. for black and white cards shipped about $55 or so per 1000 cards.. he has stock designs or draw your own and is eas
I use w4mpy the qsl man.. black and white, my design $55 per 1000 cards, 4-6 weeks tom N6AJR In a message dated 1/18/2006 12:01:06 P.M. Pacific Standard Time, martin.ewing@gmail.com writes: Not any m
for a quick 160 antenna look at the Gap Voyager. I got mine used for $150 and am pretty happy. I also have a AD sloper that will go on 160. the Gap has a capacitor you can order to "center " you freq
I bought 2300 feet of lmr 400 for 600 bucks delivered, I buy rg8x for 85 bucks per 500 feet, and still have 300 feet of rg59 on hand for matching stubs etc., and have some rg178 for pass through stuf
and I have yet to find a way to feed a beam direct with ladder line.. I mean when you turn the rotor the line touches the mast on the beam and screrws up the ladder line with metal too close.. tom N6
and I have yet to find a way to feed a beam direct with ladder line.. BYW I even have about 100 feet of 450 window line here somewhere... _______________________________________________ TenTec mailin
If you insulate the line conductors and make a BIG loop of it on a stand off piece of PVC pipe, it easily rotates without wrapping around the mast. The standoff looks like a letter "T" made of PVC pi
not too much I agree, but sometimes the thread develops a life of its own..:) My apologies if I am in error..:) tom N6AJR what does this have to do with editing in subject?? Ron wb1hga ______________
I just received one of the traded-in Orion I's last week from Ten Tec (that someone traded in for an Orion II). I really love the radio so far! One thing I was wondering about is the monitor funtion.
at the risk of being silly. have you checked the mode, and the rf gain and such and be sure they are all set, ie cw or ssb, rfgain up af gain up etc.. good luck tom N6AJR ____________________________
Well It was worth a shot.. I don't know how many times I have done that. sorry I can't be of more help, I only have the orion and a scout on the ten tec side. Good luck and keep us posted tom N6AJR _
Any ideas from the group? I am still hoping that it is operator problem rather than problems with the radio. Thanks. Charlie Hugg, K5MBX is the main rx button pushed in between the big knobs, and on
Hi Charlie. I agree, I have a ts 2000 with als 600, a 746 pro with a 2kl and at 500, and a scout with z 11 tuner, in the shack and just sold a IC 756, and have a ft 847 in the pick up, and an 857 d i