I used the steppir y cable and my com port on the computer originally itdid not work, but I bought the upgraded controller form steppir for a different reason, and it started working just fine. you h
by the way, you can only use 1 program with the setup at a time like either Ham Radio Deluxe, or a logger but not both at once. tom N6AJR _______________________________________________ TenTec mailin
Tom; My start up code comes up 3E6 3A04 when I turn on the controller. I would have thought the Fluidmotion would have known this??? I'm going to call them today and ask about this. If I'm correct in
I can not get the Steppir (4.591) controller to interface with the Orion II (2.037j). Transceiver mode on the steppir is ORION. I am using Baud 57600. I am plugged directly into the Orion ( no Y cabl
I agree with Jerry, ( KG6TT) on the so called audio problems. I checked my studio one mic and Heil cable, and the grounds were crossed and not intact. this was causing the BAD audio distortion I was
Merry Christmas and a prosperous New Year to all my Internet friends and family Tom ( N6AJR) _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.con
I was getting flicker on my O 1, and I ended up running a braid from the ground on the radio to the ground on the power supply and that took care of it. YMMV tom N6AJR _______________________________
-- Original Message -- Ebay. you == I did the same thing about a year ago, and was promptly moderated and perhaps still am, so if ya screws up, ya pays the price. No body ever said oh poor baby to me
For some time now I have been toying with the thought of putting together a battery system to run my station during emergencies . I have however little knowledge and no training or experience on how
A steppIR smaller (10 thru 20 meter ) vertical mounted on the shack roof or one of those fiber glass push up poles clamped to the back yard fence and about 25 feet of wire over to the roof of the sha
That's fine, as long as all you want is 12 volts. As I explained in my first post, my goal was to power all kinds of stuff, lights and things, from my emergency supply. A 12 volt DC booster does not
Hi gang Printing more greenbacks isn't the only factor drive down the value of the dollar. The US position in the world of late, isn't very conducive to investment. For some time to come, the euro wi
I am sorry but I would rather have my crummy rig and second rate amp and crummy deaf antennas in front of me, than have some kind of fantastic hear and work everything far away station under my contr
_http://rfsquared.com/Updates/565v2/565V2_ (http://rfsquared.com/Updates/565v2/565V2) ** See what's free at http://www.aol.com. _______________________________________________ TenTec mailing list Ten
there is still a bug or two, if you are in ssb using vox and go to cw mode and transmit the orion goes to full power transmit and can not be turned off unless you turn off the radio and then turn it
in a word... Steppir I have a 3 ele steppir 6-20 m beam and I love it. it is a perfect antenna on every frequency. no tuner needed. they make beams up to 40m and a couple of verts up to 80 meters. wo
If you ever go to Eham, I think you will find I am a real proponent of the Fan dipole , home brew style. and you don't have to spend $10,000 to do it. BUT< you canalso do a good setup on the cheap if
Good tuners, that will work on 80 and 160, will by necessity, consist of at least (1) large, expensive, roller inductor, and at least (1) large, expensive, variable capacitor. Really good tuners may
I standardized everything by using a usb winkeyer ( _www.k1el.com_ (http://www.k1el.com) ) for a pretty decent price and it does all I need, but then I don operate a lot of CW so consistency is impor
A db9 serial to USB CABLE adaptor ???? It must be more than that. The serial and USB protocols are completely different. Its not a matter of wires. There must be more to the product than that....perh