The RIT encoder on my Orion I has failed and the factory is sending me a new one. The front panel has to be "completely disassembled" to install the new encoder. The meaning of this may be clear when
I had recently questioned whether the Omni or similar rigs had a design problem if they needed to be protected by an Airpax breaker. One of the Airpax advocates responded that the issue was not oscil
I am not suggesting that at all, and taken out of context it does sound wrong, I reiterate , please. if you have a problem and it happens when you do A,B and C and it causes X problem, then by all me
will the SDR do QSK.. at 20 wpm, ? 30 wpm ? how much do you have invested $$ in the SDR and the associated computers, as much as the orion, more than the orion, and my biggest question, is that, " wi
If you spent the 'Big Bux" for one, after much contiplation based on the ADVERTISED features, you might feel different? Lee _______________________________________________ I did, but I still like it
I may of missed something but sounds like someone is trying to use a ckt bkr to correct his unattention and or inexperience in loading an antenna system. W9FCX _______________________________________
I may of missed something but sounds like someone is trying to use a ckt bkr to correct his unattention and or inexperience in loading an antenna system. W9FCX _______________________________________
that is the one I use and that is who I bought it from. they have a minimum order of $25 and $6 shipping and a single is $9.99 or something so buying 3 makes sense, and off the other two here. It wor
I found this on the Internet--Airpax breakers for $1.50! I wonder if it's a misprint. Check item #G. http://www.solarseller.com/dc_circuit_breaker_breakers_rated_up_to_80_volts.ht m Ron N6AHA -- Orig
Why is it these discussions always manage to come down to some smart remark about young (and bright, smart, and eager, and not afraid) versus old (stodgy, stupid, fearful, and still waiting for Elvis
I'm not sure how many hams want a no-tune amp--tuning a tube plate to low Z doesn't really bother me that much, in fact I prefer to do it myself, not trusting some logic circuit to tune and load for
I need some advice on something that is pretty basic. I have a new Orion, but find the dust buildup on the outside of the black case really shows up. How do you handle the dust buildup on your Orion
Reading this reflector, those are the questions that comes to my mind. I am studying to become a ham, working with a friend of mine who is a Ham, which has an Orion and an Orion 2, and it seems that
I was using 1.372 for quite a while but am now using 2.056 with no problems. I did have to reset several parameters, ( tx eq, mic gain, sp on sb and several others, but I do like it now. it works.. I
In reference to the ALC thing, I quite using an ALC line a bunch of years ago when an old Tube rig ( ft 101ee I think) was running into a Tube amp ( I think a Clipperton L) and the alc would cause th
Together with my excellent O2 I purchased an excellent Ten Tec 708A unidirectional microphone which an informal test shows as indeed being a cardioid or 'uni-directional' microphone. The Ten Tec webs
Well I managed to have the little bitty screw that holds the Knob for the sub rx disappear, I think It left for the summer and the knob was acting weird. It certainly not on the floor , where I didn'
I use 7 0r 9 inch minimus or RCA speakers, in the heavy aluminum case, sold by rat shack for a while. small, and good freq response for these old and damaged ears.. tom N6AJR == In a message dated 7/
Mine arrived yesterday, but I have questions. I understand the Line & Load, but my AIRPAX units have what looks like some kind of a sensor circuit. There are three small connectors between the Line &
First thing I recommend id to run a good ground braid from the powersupply to the radio. I have solved several weird problems with this.. good luck tom N6AJR == In a message dated 7/22/2006 11:44:52