- 1. Re: [TenTec] signal on 28.634 and other noises (score: 1)
- Author: "Joe Simpkins" <K4MD@carolina.rr.com>
- Date: Wed, 5 Jan 2005 09:31:36 -0500
- Sound like BPL? Check the audio at ARRL site. 73, Joe K4MD I hear the same signals here at my location (near Berkeley, CA). Although very interesting they are really only small disturbances compared
- /archives//html/TenTec/2005-01/msg00134.html (10,118 bytes)
- 2. [TenTec] QSK-5 on Henry 3K or 3K PremierExport? (score: 1)
- Author: "Joe Simpkins" <K4MD@carolina.rr.com>
- Date: Mon, 11 Oct 2004 06:32:51 -0400
- Anyone using QSK on one of these older units? 3CX1200A7 tube. Thanks for the info in advance! 73, Joe K4MD
- /archives//html/TenTec/2004-10/msg00193.html (7,340 bytes)
- 3. [TenTec] OMNI VI+ Logic Board (score: 1)
- Author: "Joe Simpkins" <K4MD@carolina.rr.com>
- Date: Sat, 4 Sep 2004 10:28:13 -0400
- Would there be anyone on this reflector that might help me determine a plug and pin configuration? After removing the 4 screws of the top of this radio, one can see the logic board on the right hand
- /archives//html/TenTec/2004-09/msg00083.html (8,147 bytes)
- 4. Re: [TenTec] OMNI VI+ Logic Board (score: 1)
- Author: "Joe Simpkins" <K4MD@carolina.rr.com>
- Date: Sat, 4 Sep 2004 17:50:58 -0400
- Thanks, Chuck and all for the answer!!! 73, Joe K4MD The pictorial is right. The un-plugged into pin is the rearmost (to the rear of the radio) pin outside of 34...the two connectors are tight togeth
- /archives//html/TenTec/2004-09/msg00091.html (9,596 bytes)
- 5. [TenTec] Logic board and TCXO upgrade for OMNI VI+ (score: 1)
- Author: "Joe Simpkins" <K4MD@carolina.rr.com>
- Date: Tue, 7 Sep 2004 09:06:57 -0400
- Problem solved! The daughterboard was received with the power lead attached to the wrong pin. It was very easy to pull the red lead off the plug, snip a little off the lead, and reinsert the lead int
- /archives//html/TenTec/2004-09/msg00145.html (8,058 bytes)
This search system is powered by
Namazu