My Orion sweep isnt freezing at all when on the sub receiver and any or all of the buttons "NB", "NR", "Notch", "AN" are engaged (it use too though in 1.371). The sweep is still a few m/s slow though
Hello All Still for Sale. I've had a lot of inquiries.............but no money. I have for sale a TT 538AT Jupiter in excellent condition with Built-in ATU, Knob upgrade kit and external fan...no mic
Bob and Group, I generally don't get involved with discussions on this group........but sometimes I feel that I must. The only issue with the RF Gain is with the "Sub RX" and Ten-Tec has been notifie
Hello All, Well, after using the Orion with Ver. 1.372 for a while, I am satisfied with the update (33 fixes) after 6 months and 23 or 24 beta versions. In "my opinion" there are 4 Orion issues that
I am posting this once again for those having RFI problems and believing that it is a problem with their transceiver. I apologize for the lengthiness. SDRs, You and RFI I have spent the last three ye
There are three wires (Red, Black, & Clear). The cable's shield actually only shields the clear wire. There is no shield for the red or black wires. It seems to me I would need a shield around the wi
Hello All, For those that may not have seen a post by Paul Clinton with TT, I'll repost it here for your use. Orion Mic Wiring (Later Versions -around June of this year I believe, could be a little e
Hi Mark and Group, Using a mic with XLR such as the Goldline wire it as follows: XLR = Pin # 1 (shield/gnd) to mic connector case - this shield wire comes back out of the connector and is secured by
Man, been a busy day today. This is why you want to use a dedicated 115VAC circuit for you ham gear. I published this about 9 months ago on the Jupiter Yahoo Group, here it is again! How AC Noise is
Skip, I'll trade you, in excellent condition, a TS-950SDX, SP-950 Speaker and SW-2100 Kenwood Wattmeter for your Orion, and I'll pay the shipping. I already own one Orion, but it never hurts to have
Skip I understand you frustration with the Orion. My frustration with SDR's began with the purchase of the Jupiter about 3 years ago. I know you probably don't want to hear this, but, these rigs are
Part 2 We are talking RF Grounding here and only RF Grounding: Heres what you do. There should be only one point of connection for that wire running outdoors and that is at the wing nut on the back o
Bill, If you would have really read my post you would have noticed that the subject centered on grounding for RF only. Grounding for AC, DC and Lightning is a different matter entirely and should nev
Unfrick'in believable! The IEC/AES Standard that Jim is referring to was developed long ago for Sound Reinforcement Equipment Systems safety and uniformity within the industry and doesn't have a darn
Bottom line, if I have a mic with simple coax -- one center conductor plus shield -- to which pin is the shield to be attached on the Orion? End Quote. The shield connects to the mic connector case.
Hi Tom and Group, If you want to know if you have the later version of the Orion, take a multi-meter and set it to OHMS. One lead will go to the Orion mic connector, the other lead will go to the gro
Hi Tom and Group, If thats the case, then you will have to use Pin #2 for the shield, with no wire connection to the Orion mic connector. If RFI continues, then my suggestion to you is to install a .
Hello Group and Happy Holidays, Over the last year we have all sat at our comfortable operating positions reading email concerning Ten-Tec and the Orion. As this year comes to an end, I cant help to