That's good info. Thanks, Tim. It is really easy to order those things. Here is a link to the very page. You may need to cut-and-paste to get the whole thing into your browser. In the alternative you
just one. also have a triton 544, an omni-c, a corsair II and two 580 delta rigs -- i figure if it'll help an argosy it'll help the others, too. the speakers are so inexpensive that a feller ought or
Why not both? Ethernet for control and USB for keyboard, mouse and even optional control instead of (or in addition to) ethernet? Given a choice, I'd opt for USB2 for its speed -- it smokes! 73, Mike
having fought several battles with noise, i made a list of things i've found over the years. hope it helps somebody. it's at http://www.qsl.net/n4tn/noise.html 73, Mike N4NT the same using for or pow
Hi, Bob-- The filters MUST be in the correct socket positions. The rig adds a stage of amplification for CW filters. It is also important that the bandpass control (whatever it is called) be set corr
I have a hallway which had a very inconveniently placed light switch. There are two steps followed by one step and in the dark, I'd trip over the steps trying to find the light switch. Put in a motio
It is possible that one needed to remove a jumper prior to installing the noise blanker. I'm pretty sure you had to do that with the CW filter, and logic indicates that you would need to break the si
Hi, Tony-- When the grease in the PTO gets all dried and gummy, the Omni-D may waver in frequency as you describe. You would be able to hear it in your receiver if you listen closely. If it seems to
I've broken one or two knobs. The center tube that goes on the shaft broke when I overtightened the setscrew. By putting a couple of book matches between the tube and the outer part, I've been able t
Yes. You can make little wipers from music wire (spring steel) and mount them under the two screws on each side of the PTO shaft (behind the front panel of the rig). Position them so they put slight
Limiting PA current limits PA input power. But output power can vary with the load impedance. Since the dissipation is the PA difference between these, it would seem that limiting the current would n
geez. . . what is it? Mike N4NT I "accidentally" came across a brand of external speaker that I had previously never heard of. I was curious and decided to give them a try. (I ordered 2 - one for my
If I were the FCC and wanted to destroy ham radio, I'd give us more and more bands. By spreading us out, we are less likely to find others to talk with and more likely to become discouraged so that w
I've got just the things for you folks. I've got a 160 meter converter for the Triton that can easily be made to work on 60 meters and a little Ten-Tec crystal-control box that holds four or five cry