For the person that asked about the battery for the Turner+2. If you are talking about the blue handmic with the blue cord the battery, which is still made by Duracell, is a number 175/7.5v Photo bat
I love my OMNI V and Corsair II. They seem to work better than my Collins KWM-2 my Drake TR-4Cw and my Collins 380. I like to use and fix all of them. Seems they all do what I need them to do. I like
N6KB is on the right road. I had same problem on an OMNI V. When I would transmit the reading on the OMNI was right on frequency but my frequency counter would indicate out of band transmit. Got to t
I bet if you check SWR on transmit it will be off scale. I would also get an AM station at times. Check that PLL board and the small board next to it. If I remember they are under the FM board. Do no
Thought it would. Check the connectors first. But, I am telling you the problem will be found on the trace side of the PLL boards under the FM board. Good luck, Dan/N4VET In a message dated 10/6/2009
800-833-7373 Web site works, from here.. 73, Larry KQ4B _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec *
Doug, remove the display and DeOx the pins on each side with a Q-tip. Do not spray the solution directly on the pins. After cleaning the pins with the solution replace the display board. That should
Have an OMNI V. Had the coax off the rig and was getting an S6 meter reading. If I go from the 2.4 to the 1.8 SSB filter goes to 0. On the 2.4 filter if I turn PBT to the right meter drops to 0 if I
**Join ChristianMingle.comŽ FREE! Meet Christian Singles in your area. Start now! (http://pr.atwola.com/promoclk/100126575x1221246370x1201421635/aol?redir=http://www.christianmingle.com/campaign.html
With no antenna connected is it normal for the PBT control to cause the S meter to go from 0 db to about a 6 db by turning the PBT control off center? All seems normal with OMNI V rig but this does n
I have worked on this board before but did not keep notes but for how I fixed it 6 years ago. I know it is on the bottom of the OMNI V and I think I recall it to be under Xtal Filter board. Did I rec
Ernie, when you get the reply from Paul could you share the procedure with us or with me. Also, I have noticed that emails with Ten ten tend not to get a reply you may want to call and have them send
Picked up a 263G VFO for my Corsair II today. It came without a manual. Would like to try it out tonight and need to know connect it to the rig. The Molex connector is easy but it also has two RCA pl
Thanks Steve. That is what I was going by too. I just don't want to blow anything. Could you help out with function controls? What is the scale on the brown glass for? What does the AB knob do? What
Thanks Jim. Could you give me info on function controls and scale on the brown glass? Thanks, Dan/N4VET **One site keeps you connected to all your email: AOL Mail, Gmail, and Yahoo Mail. Try it now.
Thank you Phil. I think I will like it. Santa came early for me here. 73, Dan/N4VET **One site keeps you connected to all your email: AOL Mail, Gmail, and Yahoo Mail. Try it now. (http://www.aol.com/
I now have all the information I need. Thank you all very much for the help. You are a great bunch of guys. 73 and a Merry Christmas to all. Dan/N4VET **One site keeps you connected to all your email