My OMNI V is having a problem. I turn it on and no receive on any band. I do get full RF output on all bands and the rig switches from transmit to receive and back but no audio. However, if I flip ri
After taking covers off and cleaning connectors on all boards radio was working fine. Left rig on for 6 hours and no problems. Stations coming in and strong with no distortion. On 80 meters was getti
No problem with that Joe. This is a brain buster. Can't get it to stay dead to trace it. Dan/N4VET **It's only a deal if it's where you want to go. Find your travel deal here. (http://information.tra
Further investigation reveals these symptoms. 1)Turn rig on all is fine. 2)After about 15 minutes signals drop out nothing is heard and SWR is way up on transmit. 3)Turn rig off for about 20 minutes
Well, I called Ten Tec this morning. I told them of this problem I am having with my OMNI V. Was told that the problem sounded like a synthesizer problem. I told them that it did not seem to me that
My OMNI V is now working again. The problem was discovered when I put my frequency counter on the rig and narrowed the problem down. Even though the rig showed a frequency of 3.945 my counter it was
I was at the point that hitting the radio with a hammer would have not been a bad idea, but I just reflowed solder Jim Hi Hi. 73, Dan/N4VET **It's only a deal if it's where you want to go. Find your
Steve, would this method work the same for the OMNI V? I am putting together a sort of service manual for mine and if it is the same I will place it in the manual. Dan/N4VET **Psssst...Have you heard
Could be I have been lucky but I have never had problems with my Ameritron AL-811. I run mine off an OMNI V. I use the tune key to tune the amp. I have had the amp for 8 years and bought it used. It
How much for the voice board? Dan/N4VET **It's Tax Time! Get tips, forms, and advice on AOL Money & Finance. (http://money.aol.com/tax?NCID=aolprf00030000000001)
I have an OMNI V that I would like to hookup to a computer. However,I do not know if it is worth the effort. The manual does not go into any detail as to features available with the computer hookup.
Ed, I have a Belden 25 pin male to 9 pin female modem cable factory wired. Do I have to do anything to it or do I just hook it up from OMNI V to the laptop? Will I hurt anything? Dan/N4VET **Ideas to
David, which version of his chip do you have? Is it the v9.2 or the older version? If it is the v9.2 how much do you want for it? Dan/N4VET **Ideas to please picky eaters. Watch video on AOL Living.
I have two more things to add. Always buy and sell CONUS only. If I get any bites on a for sale item and they want it shipped outside of the USA I say no deal. US Postal Money Order is the only way t
Got that right Rick! Nothing against your State but it is not CONUS and not worth the cost or insurance hassle should it be lost. Dan/N4VET **Ideas to please picky eaters. Watch video on AOL Living.
The chip Carl makes is great. I almost bought one the other night from a fellow Ham on the reflector. He was selling it for a good price and had the labels that Carl no longer provides. However, I th
Tony, as long as you can tune the SSB station to sound good and you are only off by .15 that is not bad at all for an OMNI V. If I am on 10 meters, say 28.375 I have to have the frequency display rea
You say that when you open the case the problems goes away. Check to see if one of the eight screws that holt the case on is touching a wire. The tightening of the screws seem to be causing the probl
Steve, I would save any alignment for last. Look for a bad component first. You are going to pay hell with that rig if you start turning pots without service information that you can't get from Ten T
Last I checked Ten Tec still had them. Has that changed? Have you checked with them? Dan/N4VET **Start the year off right. Easy ways to stay in shape. http://body.aol.com/fitness/winter-exercise?NCID