They fixed my Omni V while I read brochures in the lobby. Took about 10 minutes. Carl, K4SEV. _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.co
I replaced the display strip in my Delta II. I think I bought it from a company called All Electronics. It had to be trimmed to size. The guys at Ten-Tec gave me instructions on how to do it.You may
I want to publicly thank Paul Clinton for telling me how to replace the missing inserts of the knobs on my Corsair II. The rig now looks shiny and new. Much better. Carl, K4SEV. _____________________
Hi. The inserts are one-half inch across. I had some junk box stuff with different knobs but the same inserts. You gently stick a soldering pencil in the back of the knob. It melts through the plasti
Hi, David. I am not the technical type but I have a Delta II and a Paragon II on the desk. I really like both rigs. The Paragon II is more expensive and a little better in some ways. It is much large
I can't comment about the power supply but the amp is terrific. They absolutely support it, and they did a mod on mine to make it work better with a Jupiter. The model 236 remote control cable is har
Hello. Does anyone have an extra Ten-Tec model 236 cable they would be willing to part with? I will pay a fair price. I am aware of the Riley version but I need the extra connector for the model 301
I have been told to use Krylon dove gray, but I have not looked for any so I don't really know if it works. Carl, K4SEV ** See what's free at http://www.aol.com. _____________________________________
I can answer part of that. The 540 is a 100 watt output rig. The 200 watt figure is input power, which is how T-T and others used to describe their rigs. It will vary a little from band to band. Good
Ten-Tec just posted one on their used equipment list. ** See what's new at http://www.aol.com _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.co
There is one right now on that unmentionable auction site. Good luck. I have one and it's plumb pretty with a Triton. Carl, K4SEV. ** See what's new at http://www.aol.com ____________________________
My Mitsubishi DLP set produces no RFI that I can detect. My old CRT set in the same spot produced tons of it, even when turned off. I had to unplug it to get on HF. Carl, K4SEV. **Check out AOL's lis
Others may be interested in this. Here's what Ten-Tec told me: "If there is a diode just to the left of the MC74HC573 chip (third connection on the left of the edge card) place a jumper across it. De
I put an orange trim piece on a Paragon. It really changes the appearance of the rig. Of course, if you are not a Tennessee Vol fan you may want a different color. Carl, K4SEV Knoxville, TN **Create
I recall the early Triton IV's needed an internal mod to work with the remote VFO. Ten-Tec should have that information. If not, I could probably dig it up for you. Carl, K4SEV. **Create a Home Theat
Hi Steve. I find the Hercules II amp is particularly interesting. Some of them have brown plastic to match the Corsair II and, I guess, the Omni V. Others have black plastic to match the Omni VI and
I just used some ordinary RG-58 and soldered on the RCA plugs. Probably not high quality but it works and is cheap. You get to choose your length that way, too. I recall the manual says not to use au
I use a Pyramid 80 amp supply. It has no problem with the Herc, but it is a big, heavy monster. Carl, K4SEV **AOL Search: Your one stop for directions, recipes and all other Holiday needs. Search Now
While we are on the subject of Centaurs, does anyone know the exact part number of the Pabst(?) replacement fan? I have a nice Centaur with some new 572b's to go in it, but that fan noise is really i
There are some good reviews on eham for an RDC-90 switching supply. I have been using a Pyramid 80 amp supply with the Herc II but it is a heavy monster (maybe a little overrated, too) so I'm thinkin