Well, found a paper describing how TT modified my Omni V years ago. May not be exactly what you are talking about. Title: Model 562, Omni V PBT/IF-AF Modification effectiveJune 1990 Production "The p
for in I would map the DB 25 pins to the corresponding pins. You are only talking about 3 wires. Do not connect all of the wires to the radio! It uses them for its own purposes. Look in the manual.
You really do not want to do that. Take a look at fIGURE 5-10a ON PAGE 5-9. Note that only pins 1,2,3 and 7 areused. here is a good reason for that. Look at paragraph 6-24and table 6-1 on page 6-99.
Don't get hung up on connector type etc. For a 3 wre hookup, you need ground to ground, XDon one end to Rdata onthe other end. Look at the diagram on p5-9 fig 5-10B. could
B'ouht a model310 f'an' Ddn''''''t come with any documentation. that may be ok - it is a simple deicwbut hard to beliee thatthet reply on 4 screwa pushin aainst the heat sink to be a stable mount. Wh
Is the R9624 Studio One microphone CLOSE OUT $59.00 still available? If so, I would like to purchase it and would appreicate instructions on how to do this. Thanks! Scott K4VWK -- Original Message --
Just got big O about a month ago Using a logi keyer. have used the Send memory in one contest just to send my call and see how it worked. Have not plugged key directly into front panel yet.