There is a definite problem with the speakers...ask TT they can tell you. SOmething like the way they are mounted they physically distort resulting in poor audio.
Ever get this resolved ? Sorry for waste of bandwidth, but thought this might be better with a different subject! Hi Steve. By lopsided I mean that the action of the PBT control is much smoother on U
I never use it so I just had to check: If I tap the VCE key in the lower right corner, the display chnges to a d(for date I guess <gr> and two numbers (month and day - darn may have to read the manua
where I am trying to pick out one weak signal from a bunch of weak signals. Everybody's running QRP and nobody is above S5. When I crank in any filtering below 1.8 kHz, however, all of the signals ar
259\0 Hz is pretty narrow <gr> operator error... if I tuned the weak CW signal in as close to 600 Hz as possible using a fairly wide bandwidth, I could then turn both 250 Hz filters on and "fine tune
Take a look. http://www.cis.rit.edu/htbooks/mri/ Hardware is near the bottom. Generally more info than any sane individual would want <gr> A little lighter stuff is at: http://www.howstuffworks.com/m
Well, remember that all protons are not identical and one must use the 'magic individual combination of RF freq and field strength' to get a proton to flip. That simply means oine could keep the fiel
WOW! Even if calibrated to a milli db, one still has to address the rir to rig variability even within a single production run much less run to run or yesr to year. When I see that X is better by 20