Hello all - Am looking for a pair of crystal filters, Ten-Tec #217 and 218. Anyone got one or both that they don't need any more? Please reply direct. 73 - Don, _VE1BN@aol.com_ (mailto:VE1BN@aol.com)
John - Have a #288 Ten-Tec filter, new condition, $70 US mailed to you. Includes careful packaging and mailing. Interested? 73 - Don, VE1BN@aol.com Halifax, NS
Hello Peter - You are asking about the Paragon. I have both the original Paragon (with a Giehl chip installed), and the Paragon II. I am a CW operator, have been since December '45. The Paragon is a
Hi John -- Have you tried to adjust the PBT to center the sig in the narrower bandpasses? Do it carefully. I can copy an S1 sig easily with the 500 or 250 Hz filters in circuit. Don, VE1BN@aol.com
Hello - This is with reference to a Paragon II. On the PLL Major Loop Board (81636) schematic I note a 10K pot (R42) on the 70.1 to 100 mHz local oscillator feed to pin 1 of U2. U2 is the mixer. Can
To you happy Orion users Can anyone tell me what extra Ten-Tec filters are required for the stock Orion? I am interested in the rig, but don't know if any of the crystal filters used in the OMNI 6 se
Hello - Carl, Bill, Mark, and others - Thank you for the info regarding which TT filters I should save for a future Orion. Greatly appreciate your input. 73 all - Don, VE1BN@aol.com
Alan - Have you thought of installing a small 500 to 8 Ohm transformer between your headset jack and the headset? It will give you a perfect match, more AF output and no more problem. 73 - Don, VE1BN
To those concerned - I followed Dave's modification for my Titan, (a late model) and found it indeed cleared up the tuning drift. I recommend this to be the answer for those of you who have the probl
Hello all concerned - I have a spare complete blocking capacitor assembly for the Titan. It was made exactly as per Dave's (K1FK) design dimensions, and looks just like his. The metal parts are silve
Hello all concerned - I have a spare complete blocking capacitor assembly for the Titan. It was made exactly as per Dave's (K1FK) design dimensions, and looks just like his metal parts are silver pla
Hello everyone - I want to check here to see if anyone has Ten-Tec #282 and/or #285 crystal filters that I might buy. Need one of each. To make things easier, I have a US address. Anyone out there? 7
Tim - Have you checked the underside of the board? Maybe there is a broken trace or bad soldered joint at the filter sockets. Had that problem in my brand new OMNI 6+. Worth taking a look see. 73 - D
Hello all - I have a never-used brand-new Ten-Tec Model #221 crystal filter (9 mHz, 250 Hz BW, centered on 500 Hz, instead of 700 Hz). Great for you CW DXers out there. Cost me $109 US. I would like