Tuner is 9-9.5 cosmetically and a 10 functionally. Manual included. I will ship it in the lower 48 for $275 for money order. Price using Paypal is $285. 73 de John, K5SEE 281-866-8607
My venerable Omni VI, Option 1 is for sale. It is a 9 out of 10 externally - no scratches or abrasions; and a 10 out of 10 functionally. All filter slots are populated. The 9 MHz "narrow" slot has a
Talk to Ten Tec service. It may be the bias has changed on the tubes due to component failure. I doubt that the 3-500's are the problem. tnx es 73 de John, WA5TWL "When CW is no longer a requirement,
Please let me know if you have a surplus 500 Hz Model 285 CW filter. I will buy it or trade a Model 218 1.8 KHz (9 MHz IF) for it. Reply to WA5TWL@aol.com. tnx es 73 de John, WA5TWL
I use the a ten amp breaker for the Argosy 2D which is in series with a ten amp fuse. The breaker has tripped several times. The fuse has not blown. John, WA5TWL CATFISHTWO@aol.com wrote on 6/18/2006
I have used all three radios, and own an Omni VI and a Pro. For your operating preferences, I recommend the Omni VI. It is the best for CW, hands down. It is also the lowest priced. 73 de John, WA5TW
Don't know any fix. Mine does it on releasing the button on the Heil HM-10 mike. Interestingly enough, there is no spike when using the foot switch. 73 de John, WA5TWL Robert & Linda McGraw K4TAX wro
My Omni VI opt. 1 sends a pulse whenever I let up on the microphone button or when the vox turns off. This pulse has damaged the output transistors in my ALS-600 amp twice. ( I know it sounds stupid
Is the receive antenna on the Omni VI grounded during transmit. I am concerned about damaging the front end with RF from the transmit antenna. Has this been a problem for anyone? 73 de John, WA5TWL
I did number 2 except I installed a micropswitch on the back panel so the relay could be enabled when needed. Roy Koeppe wrote on 12/15/2005, 11:22 PM:
Caveat Emptor. The Maytag Neptune washing machine broadcasts the same interference. Even the noise blanker on my Omni VI doesn't make a dent. John, WA5TWL knesbitt wrote on 9/10/2005, 9:14 PM:
My wife's Neptune washer caused RFI every 17 Khz on most bands on my Tentec Omni VI, and was especially bad on 20 and 17 meter bands. In my case, the RFI seems to be generated by the motor control ci
Thanks for listing this. It is food for thought. I lived and worked through the change from top down, dictated thinking to focus groups and diversity. Both systems work, but I observed that the diver
Upgraded Centurion Amp for sale for $1350 firm plus shipping from Ten-Tec factory. Amp is at Ten-Tec factory for refurbishment/repair and will ship direct from the factory to you. Tubes are recent 3-
Upgraded Centurion Amp for sale for $1350 firm plus shipping from Ten-Tec factory. Amp is at Ten-Tec factory for refurbishment/repair and will ship direct from the factory to you. Tubes are recent 3-
This amp is at Ten-Tec factory for refurbishment/repair and will ship direct from the factory to you, including a factory repair warranty for $1350 plus shipping. Cosmetically a 9.5 out of 10. Operat
Sale is pending; if it falls through I'll let you know. I notice you are in Dallas - I am about 1 1/2 hours east. I sold my Centaur several months ago to a local ham. He came over, observed the amp i
I 'm not confused, Jeff. I want the 217 filter and have sent you $70 payment by Paypal as you requested. tnx es 73 de John, WA5TWL aka W5OT Jeff Kelly wrote on 2/8/2005, 4:45 PM: