I'm not sure why, suddenly, there is a perceived 'problem' with Ten Tec radios and/or amplifiers running full QSK? I have been doing QRQ CW for over 30 years with their equipment, running CW at speed
Nope...soon as they found out I do not live in their county, they sent me home! I said 'Awwww....shucks!" A new toy...... http://www.qsl.net/wb6zqz/antlaunching.html _________________________________
What the heck are you doing on 106 kc? I guess that 15 amps is from your driver too ???? Lyle W9FCX lyle3dd@grics.net _______________________________________________ TenTec mailing list TenTec@contes
Thanks for the suggestion Art. Tommy - W4BQF I'll sign my name and tell you to take this junk off the TT web. The V2 will be released when TT feels its ready and I hope not a day sooner. There are pl
Bill, I have two Omni 6 Plus rigs and have the Inrad 600 hz roofing filter in both rigs. While I have not made any actual measurements, to my ears the improvement is excellent. For example, living in
Ed, In my opinion, your are not in a dilemma, you are in luck...hihi. Of course the TCXO is a good feature to have. I'm not sure where it started in the later production run's of the Omni VI Plus, bu
Stuart, What upgrades are you speaking about? The Omni VI had upgrades, but I was not aware the Omni VI Plus had upgrades? Or did you accidentally over look the 'Plus' in Ed's email? Tommy - W4BQF So
Well, I didn't post such information to my recollection, but I do use relays to switch my open wire feed line. I have several double pole, double throw open frame relays out of old Johnson KW Match B
Jim, You don't actually disable the processor, you basically 'steal' a positive voltage from the pc board for the PROC switch. The reason I used the PROC switch is only because I very seldom operate
Jim, The +12vdc to J5, I would suggest you pick up the way Inrad recommends as it is a permanent dc voltage for the relay K1. What I did is ignore the cutting and splicing of wires for both J3 and J4
I don't have experience with a 'pulser' as I've always found it much easier to tune by holding the key down or using the TUNE button. But yes, when Ten Tec changed to Logic chip v1.03, supposedly to
Hello Mike and welcome to the list. When I hear this type question, I can't help but ask my ex-engineering question: "How do you know your 40 Hz off?" The reason for the question is pretty simple, yo
Phil, I believe if you recall Pete's email, it specifically stated his input was for the Omni 6 Plus. Tommy - W4BQF My Omni VI, opt. 3, has a dedicated LP LED and the LP filter works both in CW and S
Hi Sam, There are quite a few folks who have installed the Inrad roofing filter in an Omni 6 Plus. K1FK came out with some changes for the installation of that filter that I think sure makes it's ope
Sam....send me your email address and I'll forward you a copy of K1FX's instructions. Tommy - W4BQF w4bqf@arrl.net At Tuesday 09:45 PM 8/16/2005, you wrote: Hello Tommy Tnx for the encouraging info o
Ed, Congrats...those are really good old radios. See if you can find some Cramolin R-5 (in a red can) and Cramolin B-5 (in a blue can). This is the 'pot cleaner' that Ten Tec recommends for the pot's
I propose that since Dick is clearly so much more qualified than the "average" Orion owner, he implement and promulgate standards and practices for Beta Testers. Of course, with such work and respons
At Thursday 06:50 PM 8/25/2005, you wrote: Who on this reflector actually thinks and believes there is a large network of Beta testers that are testing version 2.0 software for ORION I? I would agree
It's less of a waste of bandwidth that some lid who come's on here complaining and then doesn't care to even sign their complaints. Tommy - W4BQF "The message is that there are known knowns - there a