- 41. [TenTec] USB/Serial/ARRGGGHHHHH! (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Fri, 6 Sep 2002 13:52:51 -0400
- Like Duane, I've had marvelous success with the SIIG PCI card. It's very simple to set it up to the traditional COM port addresses and IRQs. Al, K2ZN I have had great success for the last year or so
- /archives//html/TenTec/2002-09/msg00139.html (7,364 bytes)
- 42. [TenTec] FS: Filters (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Mon, 9 Sep 2002 11:05:41 -0400
- Yes, it most certainly will. It goes in one of the two NAR slots. Al, K2ZN The 288 filter is sold. Will somebody tell us if the 217 (500 Hz, 8 pole ladder CW filter for 9 MHz IF) will work in the Omn
- /archives//html/TenTec/2002-09/msg00203.html (7,745 bytes)
- 43. [TenTec] Argosy II AGC Modification (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Tue, 17 Sep 2002 12:32:34 -0400
- I work 90+% CW and have not noticed any significant degree of audio degradation in my Argosy after changing the AGC timing (10 years ago). In addition to the cap change, I also opted to drill a hole
- /archives//html/TenTec/2002-09/msg00353.html (7,963 bytes)
- 44. [TenTec] Stiff Competition Around The Corner For The RX-320/350 (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Fri, 27 Sep 2002 15:03:35 -0400
- If it's still an ISA package, it'll be tough to sell to the owners of late-model computers. Al, K2ZN Just got wind of this via the rec.radio.shortwave list. http://www.winradio.com/home/g303i.htm Ouc
- /archives//html/TenTec/2002-09/msg00436.html (8,234 bytes)
- 45. [TenTec] Looking for "fixer upper" (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Thu, 1 Aug 2002 08:48:44 -0400
- Thanks to all who responded; I have found what I'm looking for. 73 - Al, K2ZN
- /archives//html/TenTec/2002-08/msg00001.html (6,407 bytes)
- 46. [TenTec] Model 256 FM Board Help (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Tue, 13 Aug 2002 11:46:53 -0400
- I've got an FM board in my Omni V. I'm not at all familiar with the innards of the Paragon, but if it helps any, I can take a look at the connections when I get home this evening. Steve, I recently s
- /archives//html/TenTec/2002-08/msg00227.html (8,569 bytes)
- 47. [TenTec] Omni A/D Noise Blanker (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Wed, 14 Aug 2002 08:20:15 -0400
- I'm considering getting a blanker (model 248) for my recently-acquired Omni A. For those of you who have/had the Omni, is the performance worth it? 73 - Al, K2ZN
- /archives//html/TenTec/2002-08/msg00261.html (7,152 bytes)
- 48. [TenTec] Omni A/D Noise Blanker (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Wed, 14 Aug 2002 13:34:58 -0400
- Well, so far, it's 5 to 1 in favor of the blanker. Therefore, I'll put forth the question: does anyone have a noise blanker board that he/she would like to part with? I'm sure they're few and far bet
- /archives//html/TenTec/2002-08/msg00272.html (7,373 bytes)
- 49. [TenTec] OMNI D 546 Series A mods? (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Tue, 20 Aug 2002 12:38:54 -0400
- Amidst all the discussion about the upcoming Orion and Argonaut V, it's refreshing to see that there has been a recent surge in interest in the older Omni rigs. I just recently picked up an Omni A -
- /archives//html/TenTec/2002-08/msg00350.html (7,620 bytes)
- 50. [TenTec] OMNI D 546 Series A mods? (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Tue, 20 Aug 2002 14:04:08 -0400
- The earliest of the Omni A units only has a 2.4 kHz xtal filter, no 1.8 slot. CW filtering is accomplished via active filters, as in the Triton series. Also, this unit has a squelch control where the
- /archives//html/TenTec/2002-08/msg00357.html (8,244 bytes)
- 51. [TenTec] RE: new tranciever deliveries (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Tue, 20 Aug 2002 14:51:47 -0400
- The additional burden is that with software-defined radios, it's tough to determine when development is complete. End users and the competition are constantly pressuring engineering to provide "more"
- /archives//html/TenTec/2002-08/msg00360.html (7,744 bytes)
- 52. [TenTec] Re: S METERS Gotta Love'em (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Thu, 22 Aug 2002 15:38:40 -0400
- In that vein, I enjoy the warm orange glow of the large meter on my marvelous old RCA CR-88. Al, K2ZN The relationship is ....The more db, the more S units. I like huge S meters with well dampened ne
- /archives//html/TenTec/2002-08/msg00385.html (6,959 bytes)
- 53. [TenTec] USB -> RS232 (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Fri, 12 Jul 2002 09:09:20 -0400
- Mark You may want to check your USB com port base address and IRQ status. If they're not in the "traditional" areas, e.g. COM1 @ 0x3f8 IRQ4, the control packages may not work. I've had this problem i
- /archives//html/TenTec/2002-07/msg00173.html (8,882 bytes)
- 54. [TenTec] Users Net (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Mon, 15 Jul 2002 10:45:07 -0400
- I don't usually check into the net, but I try to listen when I can sneak away to the shack - Sunday evenings are tough for me. It's been weeks since I've heard anything due to all the QRM on or about
- /archives//html/TenTec/2002-07/msg00226.html (8,385 bytes)
- 55. [TenTec] Linux and Pegasus (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Tue, 16 Jul 2002 09:17:32 -0400
- Does anyone know of any Linux control packages? I have borrowed a Pegasus to play around with and would like to try various platforms. I looked through the list archives and checked places like sourc
- /archives//html/TenTec/2002-07/msg00262.html (6,573 bytes)
- 56. [TenTec] re: 60M - solution, BUY NEW GEAR (rant) (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Wed, 17 Jul 2002 10:16:41 -0400
- As an analogy: anyone out there running Win95? Have you recently tried to get support from Microsoft? That's just how the world of technology is. <rant> In all the interesting and passionate discussi
- /archives//html/TenTec/2002-07/msg00307.html (7,129 bytes)
- 57. [TenTec] Blacklist (Not) (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Mon, 22 Jul 2002 09:35:24 -0400
- Another solution, even though it may a bit painful, is to switch to a different mailer. Here at work, I'm forced to use LookOut... err... Outlook, but at home I run Netscape on the Win98SE box and K-
- /archives//html/TenTec/2002-07/msg00376.html (7,799 bytes)
- 58. [TenTec] Looking for "fixer upper" (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Tue, 30 Jul 2002 08:33:05 -0400
- I've recently been overcome with the urge to bring a dead radio back to life. Do any of you have a non-functional TT rig sitting on the shelf, collecting dust? If so, please let me know what you've g
- /archives//html/TenTec/2002-07/msg00483.html (6,672 bytes)
- 59. [TenTec] sinister doings (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Mon, 10 Jun 2002 14:40:07 -0400
- As a lefty, I've become about 90% ambidextrous by necessity. As a kid of the 60's, I don't recall there being too many "left-friendly" devices out there except for those funky padded-handle scissors
- /archives//html/TenTec/2002-06/msg00149.html (7,549 bytes)
- 60. [TenTec] a little off subject question. (score: 1)
- Author: ascanand@harris.com (Scanandoah, Alan)
- Date: Tue, 11 Jun 2002 12:37:33 -0400
- Although I don't have much first-hand experience with SS wire antennas, here is an interesting discussion: http://www.cebik.com/wiresize.html Al, K2ZN I have a question about antennas. Since the only
- /archives//html/TenTec/2002-06/msg00173.html (7,824 bytes)
This search system is powered by
Namazu