Factory serviced Nov.2010. 500 HZ filter in both IFs'. Looks as new and works as new. Backup rig that I haven't used since being serviced, except to check it out. Includes manual (with opt3 info). Sh
Probably a 9.8 cosmetically. Works well, 100 watts all bands. Includes the 302 encoder and 705 mic (no windscreen) and a digital interface. Manual can be downloaded from TT. $650 + shipping. Reply of
Factory serviced Nov.2010. 500 HZ filter in both IFs'. Looks as new and works as new. Backup rig that I haven't used since being serviced, except to check it out. Includes manual (with opt3 info). Sh
As a list moderator for a 1200 member group, I can't agree more with Jim's point of view. Since the list includes Linux, MS, BSD and OS-X users, trying to get everyone on the same page is not an easy
On 11/17/2011 12:36 PM, Joseph Holstein wrote: followed instructions in the TenTec manual and have pins 2 and 3 and 7 on the DB 25 going to the DB 9 . DB 9 has pins 4 and 6 shorted. Followed directio
I brought it up on ten meters for the first time the other day and noticed that I had only a couple of watts maybe 3 out on AM with the power level up at max. Further investigation revealed that SSB
Also record the room temperature at which is occurs and it may be temperature sensitive. See if the room temp rises 5 degrees or lowers 5 degrees or so if it comes back or disappears. Intermittent is
I just hooked my new TigerTronics SignaLink USB box between my Linux (Kubuntu 11.04, Natty) computer and my Orion II, after properly installing the four jumper wires in the SignaLink. I fired up Fldi
With Fldigi set for OpMode = CW, and "CW" in the little box under the frequency window, clicking on "CQ" causes the SignaLink red PTT indicator to light, the Orion 2 carrier to come on, "CQ... de K3G
On 06/09/2011 04:05 PM, kd5fpo@juno.com wrote: I recently bought a non-working 1315 CW QRP transceiver without the manual, I need the parts values and toroid windings information. to check the builde
I recently picked up a used Pegasus, but need some input. I've tried 3 different control programs and there does not seem to be much correlation between the power out and swr readings with my outboar
I was already made aware of the power mod. I just need to go in and adjust it to what it should be. I don't want to be buying new finals. I would appreciate any other mods you can supply. I'm learnin
Why not just use the serial port on the back of the rig ? All you need is a straight thru 25 to 9. Or you may want to look at this :: http://www.qsl.net/g3vgr/civ.html Ed w3NR
There is a max232 in the rig itself and it is used by the serial port. It also has a TTL and TT calls it a "sport" and it can use any of the level converters ala Icom. Ed W3NR
Does anyone have a schematic for the Pegasus or happen to know where I could find one ? I came across one a few weeks ago, but didn't bookmark or save it. Thanks Ed W3NR