I am open to offers on any of my remaining filters listed below. I guarantee them 100% operational. Please email me directly ( barry.n1eu@gmail.com) *SSB Filters:* *1800Hz* Inrad #761 *9MHz i.f.* for
I realize this is a long shot but I thought I'd give a shout out and see whether anybody had a Clifton Labs Z10000 or Z10000B buffer amp board that is excess to their needs. This is typically used to
I was just researching this Rick, contemplating adding a panadapter to my Omni 6+. The SDRplay is a good performer in the $100-$150 range but if you want to spend just a bit more ($200-$250), the Afe
If you go to http://youtube.com and search on SM5BSZ, you'll find three videos (rx1compare,rx2compare,rx3compare) where he tests and compares the performance of several lower priced SDR receivers, in
The threaded end of an aluminum screw broke off in one of the PCB mounting posts in my Omni 6+. Please have a look here: http://n1eu.com/screw1.jpg I'd very much appreciate advice on how to remove th
It should be visible in both these places: https://goo.gl/photos/REXNpjYEeB29Tdoa7 http://n1eu.com/screw1.jpg Again, desperately looking for advice on how to remove that screw end. Thanks & 73, Barry
Thanks Tom. It looks like Harbor Freight has a set that might work. Does anybody know exactly how those mounting posts are set in place? I'm wondering if it might be possible to just replace the moun
Thanks very much for all the responses, this is really a great bunch of guys! Peter's message triggered an ah-hah moment and after trying all my needle nose pliers, I was able to slowly and gingerly
Can anybody please provide the correct freq settings to use with panadapter software being driven off the 9MHz i.f. output: IF OUTPUT 9.???.??? MHz Offsets CW ??? Hz LSB ??? Hz USB ??? Hz FWIW, I'm d
Thanks Jim. I'm tapping the 9MHz i.f. signal between mixer and crystal roofing filter - buffering the signal before bringing it out of the rig is absolutely necessary. There is no i.f. output built i
Thanks Steve. I'm finding that I can use 9.000MHz for i.f., cw offset is equal to (minus) sidetone frequency, USB offset is -3000Hz and LSB offset is zero. Yes, I'm using OmniRig to interface to the
I posted a Web page with all the panadapter info including photos of the buffer amp mod in the Omni 6+: http://omni6.wikidot.com/panadapt 73 & Happy Holidays, Barry N1EU
Can an IC-7300 do this? http://tentecwiki.org/lib/exe/fetch.php?cache=&media=orionpan3.jpg I'm asking seriously - every image of the panadapter spectrum I've seen either on the IC7300 internal LCD or
I highly value your opinion Steve but I'm scratching my head about the display looking Flex-like to you. Here are two example videos using a computer monitor and the Icom software: https://www.youtub