Hi All, My Scout's meter is behaving strangely. Actually, I think the meter is OK, but the supporting circuitry is on the fritz. Perhaps someone here with more electronics experience than I could sug
"You should establish a GROUND BUSS! No, it is not made by GM, grin! It is a metal bar or plate you can drill and tap or put screws, nuts, and lock washers into! Then run INDIVIDUAL, yes, individual
I think that's the Koss S_B_-45, yes? Where are the 5 buck attenuators? TI2/NA7U The CM-500 costs about $55 most places. Another really good bargain headset for casual SSB is the Koss SM-45 for about
I have the AA-54 model and love it. So glad to get rid of that clunker MFJ-259. Note, though, that the AA-30 doesn't do multi-band SWR, so if you have multi-band antennas it's really worth it to spen
You won't regret it. I recently tuned a 2 elt quad and the thing is so light I just hung it off the coax connector on the element while I fiddled with the antenna and it reads out the SWR on all 5 ba
Anywhere on the feedline, doesn't matter. Good to use it at the antenna if you can and then you can compare at the shack to see if your feedline is causing any problems. Also, the AA-54 is a LOT ligh
Has anyone here set up their 516 for WSPR successfully? If so, how did you do it? The CAT control for the 516 in WSPR 2.11 seems very broken. 73, Casey, TI2/NA7U -- A Dull Roar <http://adullroar.blog
Jim, Are you referring to this: http://www.audiosystemsgroup.com/RFI-Ham.pdf ? That is 66 pages of stuff that would take an EE degree to fully understand. Or are you referring to a much more condense
My point is this: Jim wants people to stop using isolation circuits and his "carrot" to them is simply to tell them to do it the "right way" and the right way is to go study 66+ pages of technical ma