Want to trade. I have all kinds of stuff. What do you need John. Nice to see you today. Chas w1cg 73, John Mills, K1JSM jsmills63@mac.com 401-258-8604 _______________________________________________
Rick and All, I have a Ameritron AL0811A with three 572B tubes. The power output is about the same with the 572Bs as with the 811As on SSB or CW because the power output is limited by the power suppl
Tnx Mike, Agree. Our application is the use of a school computer when the school becomes a Red Cross shelter. We are using a sound card to interface to a 2 mtr FM rig which has no ALC, and a software
Yes, Let me find it first. Contact me privately. Chas This is the 600 hz version. 73 Lew K4HR _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.co
Paul, I have a brand new InRad 600 Hz CW roofing filter for the Omni_VI I will sell you for 80% of the price of a new one. I decided not to put it in my Onmi-VI as I probably would not do a good job,
Hi, I had similar problems until I got a new GFI breaker. I understand the new ones are much less susceptible to RF. 73, Chas, W1CG At 09:56 PM 3/27/2007, you wrote: John, You might want to try a dif
Bernie, I'd like one for my Omi-VI. How much? Do you take Pay Pal? Chas W1CG At 09:06 AM 4/10/2007, you wrote: Gang, Several of you have indicated you'd like me to order an Airpax breaker for you. I
Stuart, New, high quality 450 ohm ladder line has a velocity factor of 0.90. Someone said his handbook said transmitting twin lead had a velocity factor of .67. Suggest you follow up on this lead, as
Guys, It's a shame to try to lower the power on the Triton IV by removing the finals, when you can do it with the ALC control on the front. The ALC control lowers the output power to something under
Hi, I have an Omni-VI+ and an SDR-1000 and am unfamiliar with the use of the second receiver Can someone give me a quick tutorial or direct me to one on the use of the main and sub receiver, ala Orio
Hi, We had some RF feedback on our club Jupiter during field day. Other rigs, namely a Omni-VI, K2/100 and a TS-50 had no problems. Anyone with a similar experience, and what is the cure? 73, Chas W1
Hi All, Back in the early 70s, I sold all my tube rigs and went solid state with a Ten Tec 940 Triton IV and I vowed never to have tube rigs in the shack again. This is still true except for a couple
Tod, That's just the point. When the OS changes, the developer just changes the software to match. Its nearly a trivial task. The only real limitation is the hardware, and as this is the first one, i
Toby, I agree. The Inrad 2.8 kHz filter is the best investment I ever made for my Omni-VI +. It's not just the bandwidth, but the stock 2.4 kHz filter has a very poor shape factor. That, with the 600
Guys, My 2 cents. Actually, the SDR-1000 competes with the K2, OMNI-VI, and similar radios in its price class. It is about equal in performance, some things a little better, some not as good. I have
Bill and All, You are misinformed on a bunch of stuff concerning the SDR-1K. On CW, if you use an external keyer, so what if the code stream lags the key? It's all there and you are not listening to