Good article, I modified my Omni-IV by installing two 2.8 Khz Inrad filters in place of the two stock 2.4 Khz filters and it made a big improvement in intelligibility. I don't know how much the Studi
The best stuff I have used is ordinary vaseline. I use it on winches too; on a boat that is. 73, Cahs, W1CG At 01:51 PM 2/20/2006, ChasW3KC wrote: The viscosity of the red stuff is fine for a while,
Mike, I used my Omni-VI on several previous field days and I always had some problems with it. I called Ten Tec technical support and the gentleman there told me the OMN-VI should not be operated on
Rick and All, Interesting options. I plan to use the Processor switch. I have a narrow filter, and you processor is not used in CW or psk 31. On phone, I plan to back off the processor control off wh
Good rationale Dave, I had also decided to use the PROC switch, but I didn't know all the rationale behind it. I need details of where to find the leads and how interface them to the Inrad filter. I
Dudley, Try: http://www.ncdxf.org/Beacon/BeaconPrograms.html#W32. The one I like best is DxWatch. Jerry and others, I noticed in your email that you are looking for a solution to listen to the beacon
Dudley, Try: http://www.ncdxf.org/Beacon/BeaconPrograms.html#W32. The one I like best is DxWatch. Jerry and others, I noticed in your email that you are looking for a solution to listen to the beacon
Stuart, I have used both the SDR-1000 and Jupiter. The SDR-1000 I think has a better receiver. The BRD is low, but I don't know what it is in the Jupiter. Not the greatest I'm guessing. The K2 beats
Carl, I got an ordinary breaker, rated fast, and got a 15 amp one. Of course it isn't as fast as the AIRPAX one. It trips about 20 amps. Never tripped in service. I thought the 27 amps trip of the 20
Duane and all who responded, Thanks to all who responded. I tried many of the suggestions, but to no avail. The latest QST, January 2005, has an article on electrical circuits by Steve Ford and inclu
Hi, I have been watching, but yet I haven't found out where I can get a narrow roofing filter for my Omni-VI. Can someone enlighten me? TNX Merry Christmas and Nappy New Year to all Chas At 02:40 PM
Dave, He must have some malfunction of the Drive control. Also, tell him to play around with the ALC control and see if that helps. I can easily get zero power output on mine. 73, Chas Dave Heil K8MN