Thanks for letting me know. I was taking too long to think it over. Best 73's Dave WA3MKB _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contes
To JT and the Group: TenTec has now come up with new filter boards as direct replacements fror the old standards. I have added those under the column New Model to N6KB's list. Where I found no new mo
LEFT-HANDED CW OPERATORS If you wish to switch the dit and the dah paddles, remove the top of the unit. Remove the PC assembly and locate the brown and violet wires on the PC socket. The brown lead
Steve, The 215 mike should do fine. I use one with my 2 Corsair II's, an Omni C, 2 Omni B's and a Delta. It gets fine reports on all. I also use an Astatic D104 and a Heil HM-10 dual element. For the
OK, I didn't hit the shift key on the last e-mail. The address should read d.e.warnick@comcast.net Dave WA3MKB _______________________________________________ TenTec mailing list TenTec@contesting.co
Current thinking on tuner design is that the balun should be in thi input, rather than at the output of the tuner. The problem is that the balun is operated at the mismatch, call that high SWR, and t
Steve, I have 2 Corsair II's, and had to get a manual the hard way. I've made a PDF file of it. If you send your e-mail address to d.e.warnick@comcast.net, I'll attach a copy to the reply and you'll
The file is 2.15mb, Mike and yes, I am on a cable modem. Dave WA3MKB _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/list
Give John at TenTec a call for a PTO rebuild kit. It'll set you back $25 + shipping but comes with great instructions. OR, if you send your e-mail to d.e.warnick@comcast.net, I can send you a copy of
If the problem goes away when the rig is warmed up, I'm not so sure that yu have to rebuild the PTO. I suspect that you should check and reseat any mounting screws for the PTO and for the circuit boa
Does anybody have a copy of a manual for a 263 VFO. Mine just arrived and works perfectly, but I can't understand why this equipment doesn't have a manual. Anyway, if anybody can help, I'd appreciate
I have a 215 with the base. Cord has a 1/4" stereo plug that puts the mike on the ring and the ptt on the tip. E-mail d.e.warnick@comcast.net. I can take photos if you need them Dave WA3MKB TenTec ma
Dave WA3MKB _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
Thanks for the info Jerry. It's printed and filed with my Corsair II manuals. Dave WA3MKB _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contes
The TenTec Omni D series of transcievers are great radios. As for CW only, don't believe it. Ten Tec does make the best QSK and CW rigs in the world and are well known for it. However, every one of m
No spare tubes. This is an all solid-state rig. The Heil HM-10 will be a great mic. I use one often with the same rig. The wiring will be to a 1/4" stereo plug. It is shown in the manual. You'll love
Thank you KC4ATU. You have echoed the feelings of thousands. Every amateur operator who did not want to see the code dropped, but who did not write the FCC, at the urging of a very hard working ARRL,
I agree. That's why I stated that we could not have changed it, but I still feel that our voices should habve been heard. You're right on the future. Just look at there the UK has gone. Sad, but the
Check out this link. The UK is now moving to a lifetime license http://www.rsgb.org/news/lifetime.php Dave WA3MKB _______________________________________________ TenTec mailing list TenTec@contesting