If you're referring to the 961 power supply as a Corsair II supply, you're OK. I use it on the Corsair II, Paragon and Omni VI+. It's rated at 20 Amps, has an over-current sensor set for 22 amps and
Anybody know the difference or have a copy of the documentation for Geihl chips. I have a Paragon with his v30 and another with v61. Alas, no documentation on this Thanks Dave WA3MKB
Sorry for the question, but I just found the answer in the archives. In 2004, Jerald, KG6TT wrote that the 3.0 and 6.1 are the same software implemented for the two different versions of the PLL boar
I've seen literally thousands of DB-9's, but never one that is backward, as that one is. You need to replace it with a good one. I have several in the parts box, and could send you one if you're up t
Jack, The 263 VFO with the brown front is the original Corsair. The Corsair II had a gray front and was designated the 263G. It matched the more beautiful gray Corsair II (boy, that ought to get them
I'm trying to figure out which levels of TenTec firmware are compatable with which vintages of hardware. I found nothing in the archives, so here is the long question: I have 4 Paragons Ser No Chip M
Thanks, Ron. I finally read your e-mail in detail, looked up the web site and followed the steps. CT appears to work when run as an XP application undet Vista. I worked 13 years in this field, and af
Anybody got a manual for the 2510 Mode B Satellite Station? I just picked one up. (the 2510, not the manual). How do the come to not have a manual? Anyhow, I'll pay whatever is reasonable so I can pl
This is why we need to go back to a Novice class. Get the basics with a basic rig. Then apply it to all the technology that we have today. Remember zero beating a signal with your old gear. Now that
You d0on't have a problem. Either that, or we both do. That's exactly how mine works. Dave WA3MKB p.s. Now you've got an excuse to read the schematic in your spare time
Has anybody actually taken the cover off a rig, connected a good voltmeter to the DC input inside the rig after the connector and measured what happens to the supply voltage when you transmit CW, SSB
I don't know about the Omni V or VI, but my Paragons can be modified to transmit on any frequency from 1.7 MHz to 30 MHz by removing a jumper located on the Logic Board (81267). Dave WA3MKB
About 2 months ago, I paid $525 for an absolutely perfect 6n2 with a manual and power cord. The price included shipping Pricing can be all over the place. If you want a fair price and a guaranteed pr
OK, I just fired up that Paragon that I've had for less than 2 weeks. If I turn up the RF Gain (fully clockwise) I get a normanl S Meter reading. As I turn down the RF Gain, I get a lower S Meter rea
I'm running both Corsair II's and Paragons. I use a Heil Pro-Set Plus with both elements and a Heil HM-10 with both elements. I've gotten good reports with each, and with either element. However, I'v