I have a Ten-Tec 540 parts radio for sale. This rig took a lightening strike some years ago that fried the PA Section and it is no longer with the rig. Receiver works great , Dial works great and I'v
Hi Kevin, Having own a couple Century 21's I can tell you that what you describe is not uncommon. the Century 21 uses a Direct conversion RX. and one of the quirks is that of Broadcast over Load of t
I have a Triton IV that is a parts rig. It has no Final or Driver stages installed, Heat Sink is missing , But everything else works. Rx works well and lowlevel driver stage works well, as configured
KC1DI wrote: I have a Triton IV that is a parts rig. It has no Final or Driver stages installed, Heat Sink is missing , But everything else works. Rx works well and lowlevel driver stage works well,
One thing to check, As I had a 555 that did this a while ago. is the contacts on the 20M module. make sure they are clean. and well seated in the rig. you can clean them with a little alcohol use the
Hi Mike, FLdigi is quite easy to get going in PCLinux OS . I used it for along time, in the shack but have gone to Debian now. all you need to get fldigi working in pclinux is go to synapitc and inst
I use Eqsl.cc LoTW is not free last I heard it's free to upload but you must pay a fee to get the qsls to be used for DXCC or anyother award.. Eqsl is the way to go .. Sorry ARRL but this time you di
Many more would up load to L.O.T.W. if were much less cumbersome a process. They should have taken Eqsl up on their offer years ago.. E-qsl has a fine system and it works very well. There are more aw
I have a 509 that I'd be willing to part with it has low output but every thing else is working. asking 200 plus shipping or make an offer willing to trade for something also. 73 Dave kc1di Hi everyo
Hi Mike , What you look for in return? I have a Triton 4 in fair shape that need the Final Assembly to finish restoration.. The one that came with it was zorched by someone hooking up that power conn
Has some one measured the difference in current drain on TRANSMIT for both the SCOUT and the SCOUT (modified for 5watts)? The manual indicates about 12 amps for the SCOUT but that is at 50 watts. I a
Hi Dick I Could use a copy of it if you'd bewilling.. my Call KC1DI is good in any callbook or if you have the means of scanning it and sending it as an attachment that would be fine also I'm working
Wonder if anyone on the list can be of help? Looking for the following parts to restore an old triton 540 need Finals pair of pt9784's drivers PT 3547 or 2n 3553 (pair) 2n6258 power supply regulator
Thanks Paul, I Called Ten Tec They carry the finals but do not have the drivers any longer They suggested RF Parts but they want 22 bucks apiece for them so thought I'd try here first. 73 Dave Kc1di