Found the problem....loose external speaker wire(fingers crossed)! I simply don't know how I could of missed this one! Wish other stuff in life was a simple fix.... I notice that since upgrading my O
See if the PA transistors nuts, bolts and screws are all sung on the heat sink...I had a Paragon that had loose hardware...due to running a lot of rtty. Rick, Scott, is right. Although you are gettin
Not really TT related, but.... The XYL and I are in the process of moving to a new qth...plenty of room to grow wire and aluminum with huge garage/workship. Since the new house is rather small...any
I have used all of the below....ant hr es 235 ft horizontal loop up about 30 ft fed with 600 ohm homebrew feeders and either direct twin lead feed to tuner or to balun and then coax to tuner. 238 A-C
I must strongly agree with Rick on data backup.... At this qth, we clone our hard drives to an external closure on a regular basis. I have done this for almost 10 years now, and it has saved our neck
Hi all.. I have a TT Orion 1 that when booting up sometmes will have a pulsing noise in the main reciever...ssb signals sound like they are in reverse even though the proper ssb is indicated on the s
I have modified both my Orion I and Omni 7 with Power Pole connectors... While I was doing this, I looked closely at the little fuse holder and personally I don't think they are too stout current wis
Hi all...I have an Orion and a Omni VII...am wondering if there is some way to hook up a computer keyboard to these fb rigs in lieu of computer control. Any ideas anyone. de Denton WB7TDG
Correct...just using a keyboard...no pc. I think he wants keyboard control WITHOUT a computer, just the keyboard to hook up a computer keyboard to these fb rigs in lieu of computer control. Mike, WB8
I have for sale a Ten Tec 238C tuner in excellent condition...has everything that came with it. Less than 6 months old and only has had barefoot power applied. $650.00 includes shipping to your USA q
I am modifying my add to include WTB or WTT for a TT 238A, B or C tuner in excellent condition. I have for trade a Bird 4381 digital rf ower analyst with dummy slugs, nicads, wall wart power supply/c
That was fast....just got a used demo from Stan at TT...so don't need tuner anymore. I am modifying my add to include WTB or WTT for a TT 238A, B or C tuner in excellent condition. I have for trade a
I use a horizontal loop..about 235 ft in length. My current matchbox has an adjustable tap on the input coil. With a little tinkering with the input tap, feedline length, feedline width, I have gotte
It's a Nye Viking Antenna Match Box...sorry for the confusion. -- Original Message -- From: "Rick - NJ0IP / DJ0IP" <Rick@DJ0IP.de> To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com> Sent
-- Original Message -- From: "Rick - NJ0IP / DJ0IP" <Rick@DJ0IP.de> To: <geraldj@weather.net>; "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com> Sent: Wednesday, January 05, 2011 8:58 AM Su
I had both a 32 ft vertical dipole and the same vertical dipole converted over to a 40 meter 1/4 wave ground plane with 4 elevated radials. In my case the performance very close to the same on 40 met
One real old timer once told me not to use the speaker built into the radio....the vibration from the speaker tends to work things loose. -- Original Message -- From: "Dr. Gerald N. Johnson" <geraldj
Check power connector and fuse holder? -- Original Message -- From: "Rick - NJ0IP / DJ0IP" <Rick@DJ0IP.de> To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com> Sent: Friday, November 12, 2
I do this to all my Ten Tecs...was an easy mod on my Orion I...did my Omni VII some time ago. -- Original Message -- From: "Fernando" <n2fq@sbcglobal.net> To: "Discussion of Ten-Tec Equipment" <tente