Louis, Have you checked the battery? Ed, N5EI First there must be order and harmony within your own mind. Then this order will spread to your family, the community and finally your entire kingdom. On
If you have filters to sell, let me know your terms. 73, Ed, N5EI n5ei@arrl.net -- -- First there must be order and harmony within your own mind. Then this order will spread to your family, the commu
Dave, An Orion 1 or 2 would meet your needs without menus of infinite depth. Most menus are of depth 1 being selected by a well labeled button. The amateur band only second receiver is occasionally a
With cable between 600 and 650. Without cable between 550 and 600. You might get more, depending on general availability. Note that with the standard cable, match on 60 meters is not really feasible.
Didn't he leave for a while and then return? Perhaps this is a sabbatical. Those of us with Orion (565)s should all be thankful as there have been SW upgrades for over 10 years! I don't know of anoth
On 12/23/2014 12:00 PM, Katz Ajamas wrote: Here you will find a description of the second receiver/pan-adapter I am thinking of adding to the Eagle. http://www.afedri-sdr.com select the "net-sdr". It
Brian, I had the same problem on my Orion (565) while using FLDIGI with the Ten-Tec kit to use the buffered audio input/output to/from the computer soundcard:no transmit. It was resolved when I did t
Thus far I can hear digital on the speaker and see a waterfall but I cannot seem to vary the audio level for receive on the waterfall or get any decent xmit out of the Orion no matter what I do. If
Rick, How many tuned circuits are in your home built preselector? At one point I had an RME DB-22a preselector which had 3 tuned circuits with two active stages: http://www.ohio.edu/people/postr/bapi
I have used the open wire and open wire antennas that TrueLadderLine supplies. Formerly it was distributed by W7FY. The antenna is supported by trees at each end. A rope attached to one end of the an
About two weeks ago I replaced the Snaphat battery which retains the memory settings. Rig worked fine for 3 days after that, then on the 4th day I turned it on and saw the usual TenTec logo and the w
I had an RME preselector a number of years ago. Mine had a number of ganged tuned circuits and one or more vacuum tubes. I also seem to remember that it had a number of discrete bands. I don't rememb
I have acquired a Palstar BT-1500A for my 600 ohm centerfed doublet and have decided to relinquish my 253 Auto tuner setup for my Orion 565/Centaur. The package connects an Orion 565 or an Orion 566
I am in need of one of the following: I need a cable for interfacing a 253 tuner to an Omni VI. That would be a 236 cable or I am in need of an interface system for the 253 tuner and an Orion. I assu
The "feel" of the controls is vital to me for any rig. Personally, I love my Argonaut V at 20 watts. My Scout at 50 watts, but am looking at the Eagle for a new rig. I am more of a casual operator, w
I've been considering getting a Paragon II to use with MARS and to just have another radio in the shack. I have an Orion but it won't do very many of the MARS frequencies of course. I've never used a
As many of you know, and we have already announced, we are in the process of improving the Original Orion firmware. In that regard, I would like to get some more inputs and information. What firmware
I am in need of a schematic and folder/instructions for the 705 microphone. Also need the smaller of the two plastic push-button caps. Appreciate any help and will be happy to pay for these. Thank yo
An all Ten Tec solution is available for the Orion. It may also work on the Omni VII. I have it working on my system now. Ten Tec makes (and sold me) a 311 converter that converts the signals output
I have the opportunity to pick up a Paragon in great condition. It's been gone through by Ten-Tec (Major/Minor loop boards fixed, aligned, and fully gone through). Opinions on this rig, when looking