Fred, The last time I checked, TRX-Manager did not work with any generation of Orions. Consider XMLOG. It works well on the Orion (565) and Ham Radio Deluxe. A great deal depends on what you use it f
Roger Still available? If so, I'll take it. Thanks, Ed, N5EI _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/ten
In the last year, I bought one from Ten Tec to run my 253. I got a special cable made because the Ten Tec cable did NOT permit the 253 to cover 30 meters. I posted the fact and the prices I paid prev
Jeramy, Are you considering a Paragon or a Paragon II? I recommend the II. I liked mine very much but was seduced by an Orion 565. Ed, N5EI _______________________________________________ TenTec mail
I think you can get both from Ten Tec. They seemed to have all the 705 parts and of course they have the other two. Ed, N5EI _______________________________________________ TenTec mailing list TenTec
An all Ten Tec solution is available for the Orion. It may also work on the Omni VII. I have it working on my system now. Ten Tec makes (and sold me) a 311 converter that converts the signals output
I use 2.063Xg because of the possibility of using RF AGC. The only problem I have is with RF distortion of audio during transmission. Perhaps better filtering of the audio would be helpful whether us
I had one before I got my Orion 565. In my opinion they are the better of the Paragons. They have a number of features not in the Paragon w/o the Giehl chip. For example, they have a standard compute
I think one should consider a used Orion (565) if you like large knobs with an excellent front end. Ham Radio Deluxe even gives an excellent computer interface if you wish to use point and click and
Dennis, If you want to operate using your Orion and wish to use your 253 on 60 Meters, you need a cable different from the 236. It does not have the wire required to energize the memory that covers 6
I have acquired a Palstar BT-1500A for my 600 ohm centerfed doublet and have decided to relinquish my 253 Auto tuner setup for my Orion 565/Centaur. The package connects an Orion 565 or an Orion 566
I had an RME preselector a number of years ago. Mine had a number of ganged tuned circuits and one or more vacuum tubes. I also seem to remember that it had a number of discrete bands. I don't rememb
I have used the open wire and open wire antennas that TrueLadderLine supplies. Formerly it was distributed by W7FY. The antenna is supported by trees at each end. A rope attached to one end of the an
About two weeks ago I replaced the Snaphat battery which retains the memory settings. Rig worked fine for 3 days after that, then on the 4th day I turned it on and saw the usual TenTec logo and the w
Rick, How many tuned circuits are in your home built preselector? At one point I had an RME DB-22a preselector which had 3 tuned circuits with two active stages: http://www.ohio.edu/people/postr/bapi
Thus far I can hear digital on the speaker and see a waterfall but I cannot seem to vary the audio level for receive on the waterfall or get any decent xmit out of the Orion no matter what I do. If
Brian, I had the same problem on my Orion (565) while using FLDIGI with the Ten-Tec kit to use the buffered audio input/output to/from the computer soundcard:no transmit. It was resolved when I did t
On 12/23/2014 12:00 PM, Katz Ajamas wrote: Here you will find a description of the second receiver/pan-adapter I am thinking of adding to the Eagle. http://www.afedri-sdr.com select the "net-sdr". It
Didn't he leave for a while and then return? Perhaps this is a sabbatical. Those of us with Orion (565)s should all be thankful as there have been SW upgrades for over 10 years! I don't know of anoth
With cable between 600 and 650. Without cable between 550 and 600. You might get more, depending on general availability. Note that with the standard cable, match on 60 meters is not really feasible.