I had been noticing that I could hear signals quite well and the s meter was not moving off of S1. So I borrowed a HP 8654B Sig gen that was still in calibration and checked out my S meter and found
Thanks to all that have replied on & off the list. Ron, wish I had seen your list of needed correction B4 posting, Shame that this has been a problem from day 1 with the Orion. hope we don't have to
Wow...I notice just the opposite.... I use the O2 and the K3 mainly for vhf...mostly 6 meters. maybe the noise is different but I have a lot of power line noise and I find that the O2 will take it ou
I have for sale a excellent Omni 6+ mod 564 which includes the following extra filters and accesories and a #962 deluxe PS/w speaker all of the above items are in prime condition both electricaly and
has anyone tried to record a send message in send 1 through send 3. when I try to record a message I get a bad squeel in the speaker, turning the volume all the way off and then record a message. the
running ver: 2.037J well after I did a master reset and a ram clear, I recorded a message and it seemed to work OK. can anyone check this out to see if it is a software prob. or if it operator error
I have the Pro III sitting along side my Orion I, I am a VHF'ER 6 Meters and up. The Pro III don't even come close, and on some noise it is just like it is turned off. The Orions noise blanker is the
I just noticed that storing a send message in send 1 or send 2 that when I send the message the receiver does not come back to receive each time.. the first time I send the message the receiver will
OK, looks like a software problem, as I had no problem using 1.369 I just wanted to make sure that it was a software issue as I am having a intermittent problem with the contrast flickering and the d
If you were using the send 1, send 2, send 3 keys to drop in your call you will lose your receive audio every other time you push the button. there is a glitch in 1.370 that TT knows about, next upgr
I have been having a display problem also, screen flickers and gets dark also after the rig has been on for a while. what I did that really helped was that I got a piece of aluminum the same size as
No, the flickering does not seem to be related to voltage as I have tried the Orion on 3 different power supplys. sometimes when I first turn the rig on in the morning there will be no contrast just
I had the same problem after the upgrade, hit the user1 and the rig went dead. did the power up while holding the vfo-b lock in. rig booted up ok but the screen had some garbage on it. shut the rig o
I just did the new upgrade and everything was fine until I hit user-1 every thing locked up and the screen went blank. ( panic ) shut the rig off and powered it up holding in the lock button for vfo-