Tom, I have the O2 and a microham keyer 2 so the settings should be comparable. I run SSB CW and Data and I dont change the settings when switching from one mode to another. I run N1MM (Contest logge
Good Morning members, Has anyone got the connections for an Elecraft 50Mhz converter to an Orion 566. The simple connections are antenna and keying line, but what about the TRverter connections at th
Hello All. This is not a problem with my Orion 11 but it effects it, so apologies for the bandwidth however I hope some of you experts can help me with an annoying problem with N1MM. ( I didnt get an
Hello All. This is not a problem with my Orion 11 but it effects it, so apologies for the bandwidth however I hope some of you experts can help me with an annoying problem with N1MM. Its the Audio se
Hello Barry, Thank You for the (Two) replies, I repeated the mail as I didn't see my posting and your reply in the first instance. However I logged into BT Yahoo -my server - and there the two emails
Happy Easter all When I tune a CW station in using the SPOT control and then listen to that station with the 50Hz SAF in I have to re-tune with the RIT to peak the CW note. It seems to vary but is ar
-- Original Message -- If you can make such a recording (WAV or mp3), just tune to a carrier, matching your sidetone frequency, and engage SAF at a narrow setting centered on your sidetone frequency.
Good Morning All, I wonder if there is someone who could point me in the right direction with this query. When switching the TX from A to B VFO manually and back again it works fine but when I load N
Hello Barry, Thank you for the reply- almost fixed it looks like N1MM. Now when switching VFO with the mouse it defaults to left hand phone is main and right hand phone is the sub. and L/S now stays
Hello Orion 2 owners. I would like to monitor the 2nd RX by loudspeaker and use the headphones for the main RX and wondered what is the best method to do this. I could use the line output socket at t
Hi Barry and Mark thanks for the info - I think the internal L/S is disabled when the external L/S is plugged in, the same with headphones - but Ill check those suggestions again. Just thinking about
Hi Guys, As soon as you connect headphones to the front socket the loudspeakers inside and external speaker is disabled so it doesnt matter how you configure the audio controls I cannot get them to a
Hello Barry ,Mark, For Info. I had a word with Tentec and the suggestion for two L/S one on the main and the other on the 2nd RX and to be able to use headphones (although headphones OR main L/S on t
Dear Orion 2 users. Ive had the new s/w installed for a couple of weeks, and generally I really like most of the changes. I don't get any problems with the display however I am running colour 3 (Engl
Duane - Do you know I dont think I did that - Ill try that later. Although I would have thought that the A/F gain would be able to reduce the gain completely. Good news - Ive just had three complimen
Hello Bernie I can confirm that the 02 works well with FSK, and Im using N1MM / MMTTY. The input to the mark/space Connector is at the back of the rig, and you should be able to monitor the tones whe
Hello All I have an Orion 2 and after an hour or so running FSK the power trip comes in and switches the set off, for approx 7 mins. ( Running 45 watts) I have no Fan fitted so I would imagine the po
Hello Members, I have a rx antenna for 160/80 metres so I have the Rx button pressed in, and while using it on 80 metres everything works OK, but when I go to 160, there is a loud hissing noise from
Dear All, I bought an Orion 2 in July, and I am now trying to connect it to the TL922. I know the TL922 keying voltage is just over the 100v, so Ive tried relays, this combined with origional relay g
To all those members who replied Re my keying query, a big thankyou. The next time you hear me on HF it should be a big signal. 73 Dave G3RXP Try the "Amp Keyer" with optical isolation. On the net. C